I have a code I enter in the key pad. I must change the secret code. Instructions please?I have a code I enter in the key pad. I must change the secret code. Instructions please?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The correct keypad for your opener is 139.53684. The 53876 keypad is an older technology and will not work correctly. If you program it you will find your remotes no longer work and if you reprogram your remotes the keypad will not work.
You can try programming it but first make sure the battery is good. Locate the smart/learn button on the rear of the motor unit near where all those white wires go. Press and immediately release this and then walk over to your keypad and key in any 4 digit code you like and press enter.
PRESS THE SQUARE BUTTON ON THE POWERHEAD
YOU THEN HAVE 20 SECONDS TO PUNCH IN THE NEW CODE AND PRESS ENTER
THE NEXT TIME YOU PRESS ENTER THE DOOR WILL GO
If the following instructions don't work and you have a good battery the keypad has failed.
Locate the smart/learn button on the rear of the motor unit near where all those white wires go. Press and immediately release this and then walk over to your keypad and key in your 4 digit code and press enter.
What you are asking for is not possible. You need to call a garage door repair technician. They will drill a hole through the door and using a special tool can pull the rope to release the door.
If you have a wireless keypad do this: On the back of the motor unit just to the left of where all those white wires go you will find the smart/learn button. Press and immediately release this and then walk over and key in any 4 digit code you like and press enter. Should do you.
If I am correct, there is a green button on the opener. Hold that down until it stop blinki ng. Once it has, pres the opener. It should read the code and work the next time you hit the opener remote.
If not, sorry. This has worked for me
Thank You - Nick
I have a code I enter in the key pad. I must change the secret code. Instructions please?
need to change my code
Are there any keyless pads available with more than one code capability?
×