Need WIFI Configuration manual for Mc3090. Getting error "The Profile you are trying to Connect to May not Connect due to regulatory issues"

have you been able to configure a WiFi profile using the on board utility?
If not and if you don't have the icon at the bottom right of the screen you will be able to find it in the windows folder.
If you have a profile setup, does it have a yellow ! icon on it if so, use the icon on the bottom right then> options > Regulatory in the drop down menu > and untick 'Enable...' box
If you have DHCP setup in the profile you may not be getting an IP address, you can check this in the status option from the pop up menu (bottom right).
if you are not getting an IP Address, check all your settings in your WiFi profile.
I normally start with a un-encrypted network to test the unit, then add encryption after you get it all working. You will need admin rights for the AP you are using.
Additionally i have found that some units don't like TKIP type networks with out a software update.
Hope this lot helps.

Thats configuration errorGo to video player settings and configure streaming settings then it will show error Failed to buffer huh I dont know after that

Hello,

please asure yourself, that in Options of the WLAN Fusion Client (icon in the right corner) is the Regulatory set for the correct country.

To be sure, just disable the 802.11d checkbox in Fusion - Options - Regulatory.

hi
disable 802.11d in regulatory options solve my similar problem

Hello, you would need to click on the wireless icon in the right down corner and select options, then in the dropdown menu please select Regulatory please select your country. If the issue persistslase uncheck also the 802.11d option

Hello prabap. To set up a wireless connection on your MC3090, it is quite similar to doing so on a Windows-based PC. Just use the stylus to select the WiFi icon on the bottom-right of the screen and select 'properties', 'options', 'configuration', or 'connect to/set up a wireless network'. Which one you'll see depends on your OS. Just follow the instructions in the menu, input your desired connection information like the network name, password (if any), and any other information that you may need to connect to your wireless. It is important to make sure you have all the details of your network for it to connect properly. In essence: just approach it like you're setting up a wireless connection on your PC and you can't miss. If you need more help, please feel free to send me a message or email. I hope this helps. Good luck!

do the following:

click on the mobile companion icon on the menu bar at the bottom. this is the radio icon.

click on options and from the drop down menu, select regulatory. uncheck the box 802.11d and select the country where you are.

save the options.

from the drop down menu again, select the last option called export and click on the export options button. save the default registry file and you are now sorted.

"hi have an archos 5, when trying to connect to wifi, keep getting "wifi error .(0)" or "wifi error .(21), i know i am in a wifi network area as my laptop and palm pda can connect ok, however the archos seems to keep scanning for networks until it eventually switches off, any suggestions would be greatly appreciated"

i have the same problem...PLEASE is there ANYONE who knows how to solve this issue.. my email is [email protected] i need desperate help..

thankyou

Uncheck the "Enable 802.11d" in the Regulatory segment of the Wireless Options.