Wiring for fender prescision lyte bass - Dean Edge 4 Bass Guitar

Question edited to add Maker.
Question moved to Fender Squier category.

Manual

Fender Bass VI Instruction Manual - ManualsLib

https://www.manualslib.com > ... > Bass VI
View and Download Fender Bass VI instruction manual online. Fender Bass VI: User Guide. Bass VI musical instrument pdf manual download.


No Output
https://www.google.com/search?q=Squier+Bass+VI+no+output

..

Jon has told you about the serial number.

Don't get Fender Fenders confused with Squier Fenders either.

Once you know the serial number you should be able to find out the year here

http://www.guitardaterproject.org/fender.aspx

Then you could try Googling:

"reverb.com Fender Jazz Bass (year)"

and you will see a range of used prices.

Standard J-Bass wiring is parallel. Not series.
http://www.mojotone.com/support/Schematics-for-Pickups-and-Guitars/Jazz-Bass-Wiring-Diagram

To run the pickups in series, the ground of one pickup would feed into the hot of the next. That's not what comes from the factory.

Wiring diagrams are in the Support ssection on the Fender site.

schematic Fender Bass Special Bing images

that bass has a good electronics package...maybe check the jack wiring?

https://www.talkbass.com/threads/p-bass-wiring-diagram-please-help.1208915/

# z2135395 Your Jazz was built at the Fender Corona, CA. USA Plant.
2002-2003

Try reversing the wires in your input jack. Please repost results. Thanks!

Inspect the wires leading to the 1/4" jack on the bass. Try moving them to see if you can figure out which wire is the culprit. Check for any bad solder joints on the pots inside the guitar.

Chances are the jack has been twisted and damaged a wire and/or a solder joint.