Question about Westinghouse SK-32H240S Television

Open Question

Westinghouse VR-6025Z flickering

Westinghouse VR-6025Z flickering

Posted by Anonymous on

Ad

4 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
danbusa

Daniel Busa

  • 185 Answers

SOURCE: Westinghouse - 60" Class / 1080p / 120Hz / LCD

There is a method called a Power Scan this method allows you to search for all possible codes. Try this until you reach a code that carries all of the functions desired. If the TV mode button starts flashing rapidly during this process you have exhausted all possible codes.
Power Scan
1.) Hold down the clear "TV" button on the remote for four seconds, then press 500 pound ( #)
2.) Hold down the clear "TV" button on the remote for four seconds, press the big power button once.
3.) Press the channel up button once per second until the TV turns off then press pound (#).

Daniel Busa
DISH Network
Customer Service

Posted on Apr 19, 2011

Testimonial: "Thanks for the tip on the Power scan. I was trying the power scan described on some other webpage and it didn't seem to work. Your tip was dead on "

Ad
BeckiB_DISH

Becki Barned

  • 286 Answers

SOURCE: Westinghouse - 60" Class /

Hello! I wanted to give you a few more codes that you may not have tried. I also wanted to give you the instructions to the power scan, which will scan the TV for the correct code. I hoep this helps!

Codes:
500
795
719

Power Scan:
1. Hold down the Clear TV button until all lights at the top of the remote light up
2. Press the red TV POWER button
3. Press and release the up arrow on the remote about once a second until the tv turns off.
4. When it turns off, press the # (Pound) button
5. Try powering the tv on/off, and try the volume. If one or more of these functions do not work, start over at step 1 again.


Becki Barned
DISH Network Customer Service

Posted on Apr 21, 2011

westytech

vidal chavez

  • 120 Answers

SOURCE: I think I set up

Hello Jdreier520, I would be more than happy to assist you but would rather do it live. Please send me an email to westytech@westinghousedigital.com so I can better assist you. You can either provide me with a contact # or I can send you my contact information so you can call me at your earliest convenience. Please note I will need model #, serial #, and TW# all located on the back of the TV as well as what you have connected to the TV and how they are connected. Looking forward to helping you get your TV running in no time.

Posted on Jun 24, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a westinghouse tv vr-6025z and I want to hook up external speakers.


most set have jacks marked "audio out" which could be RCA type jacks, or a coaxial or optical output . Connect a cable or cables from whichever one of those is compatible with the inputs on the back of your stereo receiver.

Dec 22, 2016 | Westinghouse VR-6025Z 60" LCD TV...

1 Answer

Top half of the screen flickers. The backlight inverters have already been replaced. Any ideas?


Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electro-medical.blogspot.com/
http://electronicshelponline.blogspot.com/

Jan 18, 2016 | Westinghouse VR-6025Z 60" LCD TV...

1 Answer

Why doesn't replacement remote work?


If you are trying to use a universal remote, the problem may be that all universal remotes do not contain all possible codes. You may have to try a different universal remote that will manage all functions of your Westinghouse TV. You also can search online for any of several OEM replacement remote suppliers to perhaps get the Westinghouse remote.

Nov 23, 2015 | Westinghouse VR-6025Z 60" LCD TV...

1 Answer

Tv doesn't power on


hi i'd check the voltages on the connector on the power board, it sounds like you have 5v standby, i'd check for 12v and 24v or look for a tv tech in your area

regards
shaun

Mar 18, 2014 | Westinghouse VR-6025Z 60" LCD TV...

1 Answer

I need my tv code for my comcast remote


try the codes listed-remember not all remotes will work on all sets.....

Oct 16, 2012 | Westinghouse Recertified - 60" 1080p 120Hz...

1 Answer

I think I set up my Westinghouse VR-6025Z incorrectly, but I cannot get back to the Setup Wizard to change it. I have power cycled after setting to factory defaults and still can't get the SW to show...


Hello Jdreier520, I would be more than happy to assist you but would rather do it live. Please send me an email to westytech@westinghousedigital.com so I can better assist you. You can either provide me with a contact # or I can send you my contact information so you can call me at your earliest convenience. Please note I will need model #, serial #, and TW# all located on the back of the TV as well as what you have connected to the TV and how they are connected. Looking forward to helping you get your TV running in no time.

Jun 20, 2011 | Westinghouse LVM-42w2 Television

1 Answer

I have a VR-6025Z 60"


unplug TV and Bluray power cords from wall socket, replug HDMI cable in both units, replug power cords back in, turn them On and check.

Let me know how it worked. it seems Bluray player set its display resolution bit higher that TV doesn't support.
Please connect Bluray in TV by usual AV cable (yellow-red-white) and go to BD player setup menu and reduce HDMI Out resolution like 1080p to 1080i, then check it in TV HDMI input.

May 14, 2017 | Westinghouse LVM-42w2 Television

1 Answer

Westinghouse - 60" Class / 1080p / 120Hz / LCD


There is a method called a Power Scan this method allows you to search for all possible codes. Try this until you reach a code that carries all of the functions desired. If the TV mode button starts flashing rapidly during this process you have exhausted all possible codes.
Power Scan
1.) Hold down the clear "TV" button on the remote for four seconds, then press 500 pound ( #)
2.) Hold down the clear "TV" button on the remote for four seconds, press the big power button once.
3.) Press the channel up button once per second until the TV turns off then press pound (#).

Daniel Busa
DISH Network
Customer Service

Apr 17, 2011 | Westinghouse 16093 Remote Control

1 Answer

Westinghouse - 60" Class /


Hello! I wanted to give you a few more codes that you may not have tried. I also wanted to give you the instructions to the power scan, which will scan the TV for the correct code. I hoep this helps!

Codes:
500
795
719

Power Scan:
1. Hold down the Clear TV button until all lights at the top of the remote light up
2. Press the red TV POWER button
3. Press and release the up arrow on the remote about once a second until the tv turns off.
4. When it turns off, press the # (Pound) button
5. Try powering the tv on/off, and try the volume. If one or more of these functions do not work, start over at step 1 again.


Becki Barned
DISH Network Customer Service

Apr 17, 2011 | Westinghouse 16093 Remote Control

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Westinghouse Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76186 Answers

Cindy Wells

Level 3 Expert

6049 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

Are you a Westinghouse Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...