Question about QDI Group QDI Advance 10T Motherboard

1 Answer

Can work Memory SDRam 128MB PC100 with SDRam 512 MB PC133

My motherboard is QDI Advance 10T and at her homepage it says that suports :Three 168-pin 3.3V PC133 DIMM sockets
Support up to 1.5GB SDRAM
Support 66/100/133MHz Synchronous DRAM and 66MHz EDO DRAM .
I have 1 ram 64 Mb PC100 and 1 ram 128 Mb PC100.May I use another SDRAM of 512Mb PC 133 together with them.Is it possible that I have 704 Mb Ram without causing a hardware conflict?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 154 Answers

It wont work, it will hang ur system. Ur motherboard supports but using Mutli-frequencies RAM is not possible, either u use SDRAM 512 BM PC133 or ur 64/128 PC100 RAM, You cant use all together.

Posted on Apr 20, 2009

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I need to know the capacity for MEMORY AND THE TYPE SPECIFIED


According to the manufacturers specs these are the memory specifications you need, and the maximum the motherboard will accept...

3 x 168-Pin DIMM-socket
for up to 768 MB memory SDRAM
with 8, 16, 32, 64, 128 and 256 MB size

Dec 28, 2010 | Shuttle Slot A AI61 (MBAI61) Motherboard

1 Answer

QDI Group QDI Advance 6T Motherboard memory


make sure you are putting in the correct ram and make sure both are in good, may be registering only one, or maybe one is bad. try them one at a time in each different slot. should tell you if both chips/slots work

Dec 01, 2009 | QDI Group QDI Advance 6T Motherboard

1 Answer

How can i know if a ram suits my Legend QDI


you got to options

1. following the indications of your motherboard documentation (recommended/best), if you need to find out details about your motherboard you can possibly download and use one of this tools to get info about your motherboard and possibly find the manual online in the manufacturer's website

2. the following page will check your system to find out what memory you have and what you need and up to how much you can go http://www.crucial.com/promo/index.aspx?prog=uslp_intel_fbdimm

3. checking on ebay: in the following links indicates that it should be low density:
Module Size: 512MB
PC133 SDRAM
UNBUFFERED
Non-Ecc
168 pins
3.3 Volt
Structure: 64Mx64=512M
Low Density: 2 Banks of 32Mx8
SPEED: 133MHz
CAS Latency: CL3

hope this helps

Nov 22, 2009 | QDI Group QDI Advance 10T Motherboard

2 Answers

ASUS MOTHERBOARD P4X-X CAN USE ddr 400


pls see ur specs here

http://www.baber.com/motherboards/asus/asus_p4xp-x.htm

ur board only support following RAM specs u cannot use DDR400
Memory
:
  • 2 x 168-pin SDR DIMM Sockets support max. 2GB PC133/PC100 non-ECC SDRAM memory
  • 2 x 184-pin DDR DIMM Sockets support max. 2GB PC2100/PC1600 non-ECC DDR SDRAM
pls rate me FIXYA for this help if u like

Mar 13, 2009 | ASUS P4XP-X Motherboard

2 Answers

User manual of QDI Advance 10T motherboard.


INTENET SITES:

MOTHERBOARD.ORG

THE NAME FOR THE MANUFACTURE NAME IN THE ADDRESS BAR, ENTER KEY

Jan 28, 2009 | QDI Group QDI Advance 10T Motherboard

1 Answer

Compatible ddr memory for K7AMA Motherboard


2 DDR DIMM Sockets and 2 DIMM sockets support (can not be used simultaneously)
Two 184-pin 2.5V DDR SDRAM (DDR266/DDR200) or
Two 168-pin 3.3V SDRAM (PC133/PC100)
Maximum: 2GB

Jan 03, 2009 | EliteGroup K7AMA Motherboard

1 Answer

MS9317e+ manual


CPUs Embedded 3D Ultra AGP VGA Support Socket 478 for Intel(R) Pentium(R) 4 1.5GHz~2.53GHz or faster Processor
400/533 MHz FSB Chipset SIS 651 + 961 MS9317E+
SIS 651 + 962 MS9317E+(USB)
MuTIOL® Delivering 533MB/s Bandwidth Memory Supports two 184-pin DDR DIMM maximum size up to 2GB
Supports two 168-pin SDRAM DIMM maximum size up to 2GB
Support DIMMs of DDR333/DDR266/PC133 CPUs Embedded 3D Ultra AGP VGA Support Socket 478 for Intel(R) Pentium(R) 4 1.5GHz~2.53GHz or faster Processor
400/533 MHz FSB Chipset SIS 651 + 961 MS9317E+
SIS 651 + 962 MS9317E+(USB)
MuTIOL® Delivering 533MB/s Bandwidth Memory Supports two 184-pin DDR DIMM maximum size up to 2GB
Supports two 168-pin SDRAM DIMM maximum size up to 2GB
Support DIMMs of DDR333/DDR266/PC133manual for this board is no longer available but above is your mobo info

Nov 01, 2008 | Matsonic MS9317E Motherboard

Not finding what you are looking for?
QDI Group QDI Advance 10T Motherboard Logo

Related Topics:

353 people viewed this question

Ask a Question

Usually answered in minutes!

Top QDI Group Computers & Internet Experts

Ekse

Level 3 Expert

13434 Answers

ChinthakaJ
ChinthakaJ

Level 3 Expert

943 Answers

Tom Chichester

Level 3 Expert

55370 Answers

Are you a QDI Group Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...