How to update firmware on Sanyo DP52848 ? There

Hi Susan...this port is for updating firmware only, it won't work for anything else

Upgrade to newest version firmware on you device, sanyo tv custom firmware update you current version firmware to latest version, download newest firmware.
Download new release software and update firmware last version

• Last update version: 02.01.2020
• Country: All
• Download Size: 134 MB
• Language pack: English, Chinese
• Version: 5.1.11

Download and update firmware for products: sanyo fwbp505f firmware update, sanyo blu ray firmware update, sanyo android tv firmware update, sanyo projector firmware update, sanyo fw55d25f firmware update.

i believe most of the usb ports on the tv are for pictures only. but you would have to look up that model to know for sure.

You cannot change the aspect ratio. When a program is transmitted in 408i you will get a small picture in the center of the screen surrounded by black bars. This not the fault of the TV. You can try using the zoom feature, but the picture clarity will suffer.

How to Update Toshiba TV Firmware

1. Plug a USB flash drive in to an available USB port on your computer and copy any files from the drive that you want to keep into a separate folder on your computer.
2. Format the drive as a FAT32 file system. This erases all of the files currently on the USB flash drive.
3. Click here to open the Toshiba Support home page.
4. Click "Product Support" in the menu along the top of the home page. The Product Support drop-down menu opens.
5. Select "Televisions" beneath Choose Category.
6. Select your type of Toshiba TV beneath Choose Family. For example, options include 3D TV, LCD TV and LED TV.
7. Select your Toshiba TV model beneath Choose Model.
8. Click the red "Go" button to the right of the Choose Model section after selecting your Toshiba TV model. The product support page for that specific TV model will be displayed.
9. Select the "Downloads" tab. If there are no downloads available for your TV model, either your won't be able to click the tab or there will be a message within the tab that says there are no downloads at this time. If this is the case, no firmware updates are available for your Toshiba TV. Check back periodically, as firmware updates are released as needed and aren't scheduled.
10. If there is content in the Downloads section, look in the Category section for an item titled TV Firmware. If this option doesn't appear, no firmware update is available. However, if this option does appear, click the clickable link associated with the firmware. The TV Firmware Update and Release Notes dialog box appears. In this dialog box you can see the size of the firmware update file, when it was released, exactly what it addresses and more.
11. Click the red "Download Now" button and save the file to your connected USB flash drive.
12. Extract the contents of the ZIP file on the USB flash drive.
13. Disconnect the USB flash drive from the computer after the firmware update file saves successfully to the device.
14. Power on the Toshiba TV and then connect the USB flash drive to the USB port on the Toshiba TV.
15. Wait a few moments for the "Firmware file is detected in USB" dialog box to appear on the screen. Select "Yes" to update the firmware. A progress bar displays on the screen. Be careful not to turn your TV off while the firmware is updating. The progress bar changes to a "Success!" message after the update successfully installs.
16. Disconnect the USB flash drive from the TV and then restart the TV. After the TV restarts you can resume using the TV as you normally would.

Make sure software was in top menu in USB stick. Not ib a folder. Try reset buttons on front of TV. Could be bad e2p module. (boot firmware.)

hi,
Sanyo DP32648 doesn't have any USB port to which you can connect an USB device. One more thing in most of the TV's the USB port is used for the firmware updates and servicing purpose. If your tv has USB compatibility then try to use USB device less than 4 gb and should formated in FAT file system.
OK

The general "rule-of-thumb" for "internet ready" home theater components (TV, DVD, Blue-ray, etc.) is that they either require a wired ethernet connection, or a separately purchased "special" wireless ethernet adapter that can only be purchased from the manufacturer. The USB port will not usually give you a good internet connection with a "generic" wireless USB ethernet adapter.

In all the home theater stuff I have toyed with, the USB port allows you to watch movies or view pictures off a "jump drive" that has movies/pictures in a recognized format, and that is about it.

Anyway, unless you get a Sanyo wireless USB adapter specifically made for wireless ethernet on your set- even if you could get it to work, the bandwidth would probably make for poor picture quality- lots of screen freezes, jumping, etc. Most manufacturers have a separate, proprietary card slot for their wireless internet devices. The manufacturers do this to make a few extra bucks.
If you only have wireless ethernet at your place, you can purchase a wireless "portal" that will convert the wireless signal to ethernet so you can connect it to your set, but again it will be dependent on your wireless internet bandwidth for how well it works.
Good Luck, and Thank You for using FixYa!

the usb is strictly for updating the monitors firmware and is not an accessible usb port from the user interface

Here's one place to download the manual:
http://www.retrevo.com/support/Sanyo-DP52848-TVs-manual/id/23110dj889/t/2/

And here's the place for the stand:
http://www.shopjimmy.com/stand-from-sanyo-dp52848-1.htm