ECHO, Inc. Shred n Vac Logo
Posted on Apr 22, 2009

Motor not accelerate past idle, bogs down...

I have an Echo brand ES-230, Shred 'n' Vac, handheld leaf blower. Recently I was vacuuming dry, dead leaves when the motor suddenly lost power. At first I thought something had been lodged in the shredder teeth, creating a bind that caused the motor to shut off. After disassembling and checking for any obstructions - and finding none - I attempted to start the blower again. The blower will start without any problem, but will not accelerate past an idle, even when the throttle trigger is fully engaged. I've emptied and changed fuel, cleaned the spark plug, and air filter. Any advice?

  • Anonymous May 15, 2009

    I have a Echo ES2400, it will start and run/idle, but will not get up to full throttle, it bogs down when you give it full gas. You can slowly give it gas and it will build up some speed, but when you give it full throttle it bogs down. I even put in a new plug, air filter and fule filter, that did not help. Any advice is appreciated. Thank you!

×

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

Hot-Shot:

An expert who has answered 20 questions.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 33 Answers
  • Posted on Jul 13, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Hot-Shot:

An expert who has answered 20 questions.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Jul 04, 2009
Answers
33
Questions
0
Helped
12491
Points
55

Yes,check your spark arrestor screen in the muffler

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Echo shred n vac starts,idles, runs to about half power then bogs

Check the grommet that sits on top of tank where lines from go carb. Grommet may be rotten and crack. Try that. Have you ever replace the carb repair kit? The diaphram may be torn, defoam or have holes in them. Carb kit cost arount $10, but don't mess with the welch plug or screen in carb.
3helpful
2answers
2helpful
3answers

Motor on mod 51591 died, nedd replacement

The Mamco motor is WAY too much money.I bought brushes on E Bay and made them fit. #51591 takes 1/4 " square brushes.
0helpful
1answer

Hello,i have a echo es-1000 shred n vac.It will run full out for a minute and then wants to quit.

sounds like a minor adjustment on the high side which is the micture screw to the filter side when it starts to die put the choke on partiallyit should recover breifly which will tell you its a adjustment on the high side
0helpful
1answer

Vacuum tube will not stay attached. ES 210 sn 6ehxs.o21 .. Has this unit been recalled?

Some ES-210 units have been recalled, yes. It does not appear that the recall affects your particular serial number. However, more info is available from the ECHO-USA website, found HERE.
If in doubt, use the "DEALER LOCATOR" link and call your nearest location.

Hope this helps,
Dolf-
0helpful
1answer

Need new bag.

Could you please advise me how much it would cost for a replacement bag for a Shred'n' Vac model ES2100.

Monica Hargrove
Not finding what you are looking for?

1,712 views

Ask a Question

Usually answered in minutes!

Top Echo Garden Experts

john h

Level 3 Expert

29494 Answers

Ngoro

Level 3 Expert

3521 Answers

vince

Level 3 Expert

2530 Answers

Are you an Echo Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...