5d error code

The 5d code is actually an Sd code and it means suds have been detected in the washer. This can indicate to much soap or the wrong kind of soap was used in the washer. Be sure HE detergent is being used. If can also indicate the drain pump is restricted or the drain hose is kinked.

My kenmore he2 plus washer gave me a 5d code and door locked ...

https://www.youtube.com/watch?v=-v66USc48o0

Whirlpool Duet Sport ht 5D/F21 Error Fix - YouTube

? 5:40
https://www.youtube.com/watch?v=2dV3FLzWPTM
Aug 6, 2013 - Uploaded by Mariela Gonzalez-Aroche
Steps in this video may be used to repair both F21 and 5D error codes. ... which is located on the bottom right corner of thewasher machine.

On the 5D error code 30 appears to be shutter related and general advice is to get a professional repair or send it back to Canon.

Error Code 80 on the 5D II indicates the a
Malfunction related to the electric control of images has been detected.

My 5D error was certainly a water heater error because I changed the thermostat for a more elevated value before the error occured.
I have never used this value before and coming back to my usual value solved this error.

That 5d is a clue. Too much detergent, the wrong detergent, or detergent in wrong dispenser can cause the 5d which is suds overdose. The F-21 is from banging on the touchpad in frustration!
Keypad error! Take the base panel off and find the tech sheet behind it. The tech sheet will give error codes and what to try. I have an HE washer service manual and some repair photos HERE

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

5d is a definitely a the code for a plugged discharge. We removed the lower access panel and discovered a virtual treasure: $12.50 in quarters, nickels, dimes and pennies, a pen, a pencil, collar stays, 10 bobby-pins, 3 barrettes, a elastic headband, a draw string, a box cutter, 3 washers, 3 broken zipper parts, a elastic waist band. Amazing it took all to trigger a 5d error code. Hope this helps!

Error Code 5d: Initialize Init Onboard Super IO switch.

Generally caused by a mismatched RAM stick int the MIDDLE RAM slot. Try using a single stick of RAM and boot, make sure you do not put this single stick of RAM in the middle slot, and it should boot right up.

I picked this up from an abit forum, It appears that it is quite common, look here, http://forums.hexus.net/abit-care-hexus/104674-abit-ab9-pro-code-25-error.html