Code no.for sansui TV with vcr

Hello
You hven't given any specification of the remote control you have. Yet I hereby send you universal remote codes for Sansui herewith.
Three digit universal remote codes for Sansui are:
135/ 136
Four digit codes to check with are:
0135 0310.
Four digit code for Sansui TV/VCR cobo is:
0310

1. .
   

Hello
Sorry to say that Sansui is not listed to Sony V201 remote control. Anyway I'll give you some three digit and four diit conds for Sansui. I'm not sure will it work, but try these, sometimes you may get.

Three digit universal remote codes for Sansui are:
135/ 136
Four digit universal remote code for Sansui TV/VCR combo is
0310

Four digit universal remote code for Sansui TV are:
0135 0310

Direct Code Entry

1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.

Code Search If after trying "Direct Code Entry" your device does not respond, or if your brand is not listed, try doing a search of the code library for your code by following these steps.

1. Manually turn on the device (TV, VCR, etc.) to be controlled.
2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
3. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks once, then stays on.
4. Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks, then stays lit.
5. Press and release MUTE to install the code. The indicator light goes off.

Most users will want to store VCR codes under the VCR button, Cable codes under CBL, etc. If you want to store a VCR code under CBL, etc., first follow the procedure for Direct Code Entry and press CBL in step 2 of Direct Code Entry, then enter ANY VCR code in step 3 of Direct Code Entry. Then follow the steps above for Code Search.

NOTE: Switch OFF and switch ON your combo with its FRONT PANEL POWER ON-OFF SWITCH each time before trying an other code.
Hopes you will be helped.
OK.

Sansui 0000, 0240, 0479 (for TV use 0463)

GIve these codes a go

Hope this helps you out.

Cheers Little Dish Fitter

You can try the codes for Orion, Emerson, and RCA. Call the number on the back of the set to see if the original remote is available.

You can try codes for Orion, Emerson and RCA.

Try the codes for Orion, Emerson and RCA as well as Sansui. Good Luck!

21479 is the Sansui code that worked for me with the Memorex TV/VCR combo MTVT2135 and the Comcast Custom DVR 3 Device remote.

Code For Model JER422
Code 3168 for Sansui DVD Code 3401 for Sansui DVD Code For Model JER422
Code 2010 for Sansui VCR Code 2031 for Sansui VCR Code 2111 for Sansui VCR Code 2123 for Sansui VCR Code 2130 for Sansui VCRif these dont work try
http://remotefinder.rca.com/

and if you cant find one there then your remote does not support this device.

TRY 0000, 1479, 0479, 0067, 0209, 0041

As far as i know,this product is no longer available. You can try on ebay.