I got this message when I print one copy of pages (only pdf files). I did lots of things but nothing chaged. Finally, it got fixed by installing a different pdf reader.
Go to menu.
scroll down to device common
scroll right
scroll down to ram disk
if it shows off:
press ok button now question mark blinking
scroll down to on
press ok button
press menu button
SOURCE: kyocera FS-1016MFP "printer error service
Code: 6000
Contents: Broken heater lamp error
The temperature won't rise by 1°C/33.8
°F during warming up and the heater is
turned on for 5 seconds.
The temperature won't rise by 1°C/33.8
°F during printing and the heater is
turned on for 5 seconds with the duty
cycle more than 60%.
Causes:
- Defective fuser thermistor.
- Broken thermal cutout or heater lamp.
- Defective engine/high voltage PWB.
SOURCE: Kyocera Ecosys FS-3900DN in HP emulation mode
Right click on the printer icon and choose properties. Your emulations are listed there.
SOURCE: kyocera fs-2020d doesnt do multiple copies of documents
This message often shows up when the memory is full from one document (normally a large file) to fix it you have to add external memory
5,237 views
Usually answered in minutes!
×