Fault code F51 What does it mean and what are the solutions or repairs to eliminate this fault code
Its the Rotor Position Sensor very easy solution!!!chat with me online and ill step you through it save up to $65 (my in-home rate in florida is $75!!!!!!!)
what can i do to fix it
hello are you there
are yo there
×
The F51 fault code on your Cabrio washer indicates that the control board is not sensing the proper drive motor spin. To clear the fault code, press the Pause/Cancel button.
Make sure that the drain hose is not stuck way down the stand pipe. This can cause siphoning of fill water which will inhibit proper motor rotation.
Check to see if the wash basket spins freely. If it does not, you may have an item of clothing stuck between the outer tub and the inner basket. This restriction in rotation will also cause an F51 fault code.
If these tips do not help you resolve the F51 problem, then you probably have a component failure. Possible failures include: wire harness or wire connection problem between the machine control and the RPS sensor (Rotor Position Sensor), a failed RPS sensor, a failed drive motor, and a failed machine control board.
921 views
Usually answered in minutes!
f51 code comes up and have to push cancel and start over.tried store i bought it from, but it's one month out of warranty
My power went out and when it came on 2 seconds later my cabrio washer was flashing F and 50 (I thought the 50 was the minutes for the cycle I was on but after seeing all these F51 comments I think not). Service is coming later this week but I am 1 month out of warranty of course. Can you fix this yourself?
How do you remove coins from the bottom drum
fault codes for whirlpool cabrio
which are the fault codes
×