How is your TV setup--do you have a cable box, satellite, or basic cable? I would recommend going into the settings and running a channel search.
Press Menu. The on-screen display menu options with Setup highlighted.
Press RIGHT arrow to enter the sub-menu, then press DOWN or UP to highlight AUTO CH SEARCH.
Press ENTER or RIGHT arrow to start the search.
SOURCE: my new 32 in dynex tv has white squibbly lines on
Try doing a factory reset of the TV. Go into the service menu (Press, then release the INPUT button on the remote, then key in 2580). Scroll down to "Other Settings", then go to "EEPROM Init", then press enter, select YES and press enter. This will reset the TV to the factory defaults. If that does not work, send it back for repair. Good luck!
SOURCE: i connected dvd player to dynex 32 inch tv. what
You should be connected to the AV input 1 slot. Change the input on the TV to Input 1
SOURCE: tv remote codes
use an auto mode if there is one for scan locking after switching on the TV manually. Good luck.
SOURCE: I have a 32" Dynex
The code to reset is 9999. Once you enter that, it will let you in to change the password. If it is like mine, it will still have the lock on every channel and will not let you change it.
SOURCE: I need a cord for a 32" dynex tv flat screen
Go to Best Buy sells them, they are cheap. I own the same TV Unless there are other implements like games, dvd, etc. You don't need a cord with the noise suppresors. A general PC or appliance cord will do.
Hope this helps.......Bob
196 views
Usually answered in minutes!
×