Washes but won't spin.

Broken belt.

I'm not familiar with roper washing machines so I'll ask the question does it have two fill hoses. Most European machines now only have one fill. If it has two then it sound like the machine takes the initial water from the one fill and the rinse cycle water from another. The humming sounds like the valve for the other fill needs replacing. These are quite inexpensive and easy to fit. Power off.. remove lid ....switch of water...take out valve when you establish which one is affected and replace

IT WAS THE CONTROL ELECTRIC OR COMPUTER BOARD WAS DEFECTED. I CHANGED A NEW COMPUTER BOARD NOW IT IS WORKING WELL

lid switch broken

sounds like motor brushes may need replacing.

From what you state i would think that the brushes in the motor need replacement, as when worn the first thing that stops working is the spin cycle, The motor goes very weak, they tend to last between 3 an 5 years depending on how many washes your m/c has done, they will be of low cost and worth trying as it is an easy 30min fix for a handyperson...

sounds like the timer is shot.

Thanks for your question You say it works on one cycle but not the other lets sat you start a regular wash ,the washer should fill ,wash for the minutes you have set, pump out the water #spin , Stop fills & rinse stop pump out water &spin If you try a delicate cycle and it does not do what it did on regular cycle . You have a timer problem . Thanks for your question hope i helped you solve it . THE APPLIANCE DOC

Thanks for the question If your washer sorta spins and washes ok, your problem is with the transmissionTHanks for your question THe Appliance doc

I sounds like it needs a new timer.