How to fix memory error - Pentax Optio 60 Digital Camera

C6704 Description Image input time out
Image data is not input from the scanner to the MFP board (MFPB). Remedy 1 Select [Service Mode] - [State Confirmation] - [Memory/HDD Adj.] - [Memory Bus Check] - [Scanner-Memory], and conduct the memory bus function. 2 Check the connectors between scanner section and MFPB for proper connection and correct as necessary. 3 Replace MFPB. 4 Replace CCDB.

http://www.hardwarecanucks.com/forum/troubleshooting/1620-how-do-i-fix-memory-parity-error.html
INTRESSTING READING.THE MEMORYS MUST HAVE THE SAME TIMMING.BE CAREFUL IN BIOS.

Hello.

To do that, you need a card reader. Insert your memory card into a card reader, then:

Insert the card reader into your computer's empty USB slot.

Go to "computer" or "my computer".

Right click on the drive of your card reader and choose properties.

Click the "Tools" tab then click "Check now"

Check "Automatically fix errors" and "Scan for and attempt to recover bad sectors"

Click "start" and wait for it to finish.

That should fix the errors. If it doesn't, format your memory card.



Thanks for using Fixya!

The Memory could not be read error google_ad_client = "pub-5406364303442190";/* 336x280, created 7/6/08 */google_ad_slot = "2528346899";google_ad_width = 336;google_ad_height = 280; tweetmeme_url = "http://www.ghacks.net/2007/05/10/the-memory-could-not-be-read-error/"; tweetmeme_source = "tweetmeme"; Share I know that this may sound funny but I also received the error "The memory could not be read" during Windows startup. The funny thing is that this error and the error "the memory could not be written" are not related to each other. I found a fix that helped pretty fast. The memory could not be read is apparently a Java error which is causing the problem. You find a big explanation with various solutions at a official Java website.
I would still like to outline how I fixed this error. The Java website has several solutions to get rid of this error and you should start at solution 1 and the error will hopefully disappear after you have tried solution number 4 which is the last one in that list. My error disappeared after trying solution number 1. Here is what I did to fix "the memory could not be read".
I went to the directory C:\Program Files\Common Files\InstallShield\Engine and renamed the Engine directory to Engineold. After renaming that directory download the latest Java Runtime Environment from Sun and install it on your computer. The error disappeared after restarting my system.
You should try solution 2, then 3 and lastly 4 if the first solution did not work out to get rid of "the memory could not be read".
google_ad_client = "pub-5406364303442190";/* 300x250, created 2/27/09 */google_ad_slot = "1148508964";google_ad_width = 300;google_ad_height = 250;

Well. There might be quite a lot of reasons that may cause this kind of format error problem saying memory card not formatted. Check out this article how to fix memory card not formatted to see fix step by step. Best regards.

Problems typically are pretty rare with Panasonic Lumix digital cameras. On those occasions where you do have an issue, though, look for an error message on the Panasonic camera for some clues as to how to fix the problem.
he seven tips listed here should help you troubleshoot your Panasonic camera error messages.

1. Built-in Memory Error error message. If you see this error message with your Panasonic camera, the internal memory area of the camera is either full or corrupted. Try downloading photos from the internal memory. If the error message continues to appear, you may need to format the internal memory area.
   
2. Memory Card Locked / Memory Card error message. Both of these error messages are related to the memory card, rather than the Panasonic camera. If you have an SD memory card, check the write protect switch on the side of the card. Slide the switch up to unlock the card. If the error message persists, it's possible the memory card is corrupted and needs to be formatted. It's also possible the memory card was formatted using another device that is not compatible with Panasonic's file structure system. Format the card with your Panasonic camera to fix the problem ... but keep in mind that formatting the card will erase any photos stored on it.
   
3. No Additional Selections Can Be Made error message. If your Panasonic camera allows you to "save" photos as your "favorites," you may find this error message because the camera has a limited number of photos that can be labeled as favorites, usually 999 photos. You cannot mark another photo as a favorite until you remove the favorite label from one or more photos. This error message also may occur if you're trying to delete more than 999 photos at one time.
   
4. No Valid Picture error message. This error message typically refers to a problem with the memory card. Most of the time, you'll find this error message when you try to play back images from the memory card and the memory card is corrupted, empty, broken, or has been formatted with another camera. To fix the memory card, you must format it, but formatting a memory card causes all photos stored on it to be lost. Try inserting the memory card in another device or in your computer and try downloading any photos stored on it before formatting it with your Panasonic camera.
   
5. Please Turn Camera Off And Then On Again error message. At least this error message says "please." This error message most likely occurs when one of the parts of the camera's hardware is malfunctioning, usually a jammed lens housing. To try to fix this problem, start by turning the camera off for a few seconds before turning it back on. If this doesn't fix the problem, try resetting the camera by removing the battery and memory card from the camera for at least 10 minutes. Replace both items and then try turning the camera on again. If the lens housing is jamming as the lens moves through its zoom range, try gently cleaning the housing, removing any debris or grime. If all of these steps don't fix the problem, you'll probably need a repair center for the camera.
   
6. This Battery Cannot Be Used error message. With this error message, you've either inserted a battery that's incompatible with your Panasonic camera or you've inserted a battery that has dirty contacts. Gently clean the metal contacts with a dry cloth. In addition, make sure the battery housing is free of debris. You sometimes may see this error message if you're using a battery that's not manufactured by Panasonic. If the third-party battery is working OK to power the camera, you probably can ignore this error message.
   
7. This Picture Is Protected error message. You'll see this Panasonic camera error message when the photo you've selected has been protected from deletion. Try working through the camera's menus to figure out how to remove any protection labels for the photo files.
   

Keep in mind that different models of Lumix cameras may provide a different set of error messages than is shown here. If you are seeing Panasonic camera error messages that aren't listed here, check with the user guide for your model of Panasonic Lumix camera for a list of other error messages, or visit the Support area of the Panasonic Web site.

Kindly Open and close the front door.
Check wether your cartridge is properly mounted.

Hi,

If it is having trouble formatting in a PSP try taking it out and formatting it on your PC in Windows. Hope this solves your problem!

Please rate!
Cheers

Hi, The Dimm Error your receiving does it have any numerical codes ? The firmware could possibly be defective ?