Acer Aspire one wireless connection problems

Remove and recreate the wireless network connection

1. Click on Start, and then Control Panel
2. Double click on Network Connections
3. Right-click the wireless network connection, and click Properties
4. Click the Wireless Networks tab
5. Under Preferred networks, click the wireless network, and then click Remove
6. Click View Wireless Networks
7. Under Network Tasks, click Refresh Network List
8. Under Choose a wireless network, click the wireless network that you want to connect to, and then click Connect

In Windows, there is a power mode setting for the wireless driver that may help this issue. Follow the instructions below.

1. Go to Control Panel, System, click the Hardware tab and select Device Manager.
2. Click the + next to Network Adapters and double click on the wireless network adapter.
3. Click on the Advanced tab, select Power Save Mode from the list on the left.
4. Change the Value on the right to Off.
   The default setting is Maximum, which may cause issues similar to those described.

Check to see if this has resolved the connectivity issue. If it has not, the following steps may need to be completed.

1. Click on Start, Settings, Control Panel
2. Double click Network Connections
3. Right-click your wireless network connection, and click Properties
4. Click the Wireless Networks tab
5. Under Preferred networks, click the wireless network, and click Properties
6. Click the Authentication tab, click to clear the "Enable IEEE 802.1X authentication for this network" check box, and then click OK twice.

As i know, on acer netbook you have to switch on your wireless by pressing Fn key with one of the f keys, look from an antena icon on this key or go to control panel open network connections and right click on wireless connection and click enable.

you are seeing it strongly connected to the ROUTER---try unplugging the router for a few minutes and plug it back in----Does the netbook "SEE" the network? entered correct ssid? Is the wireless switch enabled on the netbook?

hi there!

The Acer Aspire One is a miniature laptop that includes many of the same features larger laptops have. The Acer Aspire One is about the size of a diary and features an 8.9-inch LED LCD display, an 84-key keyboard, two built-in stereo speakers and Wi-Fi capability. Though smaller than most laptops, the Aspire One functions much like other computers. The Aspire One uses the Windows operating system, so it connects to a wireless network the same way that any other Windows computer does.

Instructions

1. Click the "Start" menu in the bottom left corner of the screen.
2. Click the "Connect To" option from the menu that appears. The "Connect to a network" screen will appear.
3. Click on one of the networks listed on this screen to select it.
4. Click "Connect" at the bottom of the window. You now have set up a wireless connection on your Acer Aspire One.

The network security must be established by you.

Hope it helps,
fossildude

Connect to the internet router using a patch cable. Goto support pages of Acer and search for an updated driver for the network card. Download and install. Now try again.

Here are some great source where will will get any kinds of HP,ACER,DELL and COMPAQ laptop Solution and any kinds of Driver download.

» Hp Laptop's Solution
» Compaq Laptop's Solution
» Acer Laptop's Solution
» Dell Laptop's Solution
» Toshiba Laptop's Solution
» Asus Laptop's Solution

» Hp Driver's Download
» Compaq Driver's Download
» Acer Driver's Download
» Dell Driver's Download
» Toshiba Driver's Download
» Asus Driver's Download

hoyagese83

make sure you're plugged in....

Right Click THe Wifi Icon by your clock and choose to repair connection

if still not connecting.... uninstall wifi from the device manager and reboot

Try Resetting Your Wireless Router.. turn it off then back on
then run a repair on your wireless network

GO TO START>NETWORK CONNECTION
CHECK WIRELESS IS THERE OR NOT
if not there
go to Start>Run type "services.msc"
start windows zero configuration
GO TO START>NETWORK CONNECTION
right click WIRELESS
properties
select wireless tab
put one tick mark in the use windows to configure.......................
ok
agin right click on wireless
view wireless network
search on wireless(leftside)
select connect

go start run type services.msc then go down to the bottom click zero wireless configuration then click start and you should be good to go