Cimbali m32 showing fault code E58 - Coffee Makers & Espresso Machines

The dreaded e58 code can be a hard one to nail down. From experience a good place to start is the ignition switch. Not the easiest part to change, but definitely the cheapest place to start. If you can change it yourself I would suggest doing it and clear the codes and cross fingers it takes care of it. Otherwise it is hours of chasing and checking connections. e58 indicates a low voltage or poor ground to the ECU for multiple systems.

These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/

Good Afternoon Friend,

I understand you are receiving an E58 code on your Frigidaire Affinity washer, model# ATF8000FE. The E58 states that it is a high current on the motor phase. This could possibly be a false code, as well. I suggest resetting your appliance, by either unplugging it or shutting the power off at the circuit breaker, for 3-5 minutes. Restore power and start any cycle. I ask that you please follow up with a comment on the post, at your convenience, to advise if further troubleshooting is needed or if your appliances status has changed successfully. Hope this is helpful.

-Best Regards-
WP

Please always include FULL 'make model (what it is)' in all questions.

There is an 006 error, but not a 066 on this model.

http://www.sreweb.com/lockbox/manuals/lacimbali.pdf

however, there is an 066 error on this model! Page 29.

https://ucoffee-machines.com/wp-content/uploads/2015/11/La_Cimbali_Q10-Technical_manual-eng.pdf

Maker Support here

La Cimbali: Professional espresso coffee machines

https://www.cimbali.com Elegance, reliability and high performance: the finest tradition of Italian espresso coffee. Explore our large range of professional espresso and cappuccino ...

I hope this helps

According to the alarm code E58 is usually a washing machine with inverter and means problem with inverter board or motor or wiring between inverter-motor.

Could be:

E58 - Inverter is drawing too much current (> 4.5A).
Abnormal motor operation (overload).
Motor-inverter wiring faulty.
Motor faulty.
Inverter board faulty.

E57 - Inverter is drawing too much current (>15A)
Motor-inverter wiring faulty.
Inverter board faulty.
Motor faulty.

Dado

Hope it would help by follow the step on this link: http://www.hwl.dk/product-images/mespres32_man.pdf

Hi, error 67 is a lack of water flow through the water sensor during a dispense. proberly due to a blocked piston or dispense nozzle (small hole on the right under the coffee head cover)

cheers
midman

Replace and or check the pressure stat, it will be on the right side of the machine with 2 small wires going to it, you will also have to replace the safety.

http://www.home-barista.com/espresso-machines/la-cimbali-m30-classic-manual-i-have-got-it-pdf-t6127.html

parts diagram there too