Usb drivers where do i download mio a701 usb drivers?

Mio p350
http://www.giantsacademy.com.au/layouts/mio-p350-usb-driver.php

Refer to this manual it has all the info you need. Click on the the link below to download
http://www.mio-tech.be/Manuals/269+/Device-Manual/268-plus-269-plus-Device-Manual-EN.pdf

First try a reset... then try turning off the little power switch next to the reset, then turn it back on. If none of this works, your firmware is likely corrupted... then: You either need to return it to Mitac or locate (Google) & flash the firmware file into the unit as follows:

Connect the mio p550 to PC
1.put the Button of the PDA in ON position
2. hold the joystick downward and press the reset button
3.choose "Image Upgrade tools"
4.choose "0=Image by USB"
5.intall the usb driver (PC require the drivers). The driver in the
folder "USB driver" that comes with the firmware file.
6.open the software "dnw5.0e" (also comes with the firmware package).
7.(if you want to make a test of connection USB, click the "USB
port/Status". If all is ok go to step 8
8. click "USB port/transmitted" and to show the way of the file
"MioP550 - Osc260A R05_P09.nb0"
9.press the reset button to restart the mio p550.

You'll need to find the firmware (ROM) image file (Google) and then: Connect the mio p550 to PC
1.put the Button of the PDA in ON position
2. hold the joystick downward and press the reset button
3.choose "Image Upgrade tools"
4.choose "0=Image by USB"
5.intall the usb driver (PC require the drivers). The driver in the
folder "USB driver"
6.open the software "dnw5.0e"
7.(if you want to make a test of connection USB, click the" USB
port/Statute". If all is ok go to step 8
8. click "USB port/transmitted" and to show the way of the file
"MioP550 - Osc260A R05_P09.nb0"
9.press the reset button to restart the mio p550.

Good luck!

Although the screens are available from many places like Ebay and Craigslist, it is best to get it from the manufacturer, Mio. It may be more expensive, but it guaranteed to both fit and to work.

The Users Manual and Support for MIO DigiWalker C520 is here.

I noticed this thread had been read 66000 times there:


Question: Is there a map update available for my C-series device?
Answer: We are working on newer map updates with Mio More Express software for C-series devices: C220/S, C320, C520, C720t. The products are in DVD media because the big size is not practical for download. Pleasse check back with Mio support later while slight USB driver issue is under investigation.

Hi, i uploaded the drivers for Mio C220. Enjoy it :)
http://rapidshare.com/files/220860843/USB_DRIVER.rar

throw your device in the garbage , or go to mio service center .

WBR

The touch panel on the LCD unit is defective and needa to be replaced with a new Compleet new LCD+TP unit.

If you have a screen gaurd on your Touch panel, try to remove it and check again, if it doean't help ---> new LCD+TP unit

Doesn't that use Activesync? http://www.microsoft.com/windowsmobile/activesync/default.mspx USB driver is at http://www.mio-tech.be/en/support/168-downloads.php Hope that helps. Good luck