How do i change a Jegs JN152 doorbell channel

Try another set of brand new Duracell batteries and make sure they are inserted correctly. If the Doorbell is wireless as many are these days, it may need pairing. There are settings so that if next door has the same bell, you can use different channels.

Living Doorbell ' Jacob Jensen Design

jacobjensendesign.com > product > living-doorbell

Cordless doorbell with a 150-meter radius transmission to an unlimited number of bell pushes. Features five specially composed signals (clear polyphonic tones) - ...

The doorbell and the car wireless are on the same frequency, post doorbell model number, I will see if the doorbel frequency can be changed.

Lots of help on this is available. A special screwdriver is apparently needed here is the info on that:

https://www.bing.com/shop?q=ring+doorbell+battery+change&FORM=SHOPPA&originIGUID=F4510BCC545345B48860F54C9885FB1C

Google Ring doorbell battery replacement.

The webpage http://www.dimango.com/dc-cd-quality-doorbells.htm

shows:

Wireless Doorbell CD Quality Door Chime Model RC4300

No longer do you need a wired door chime or traditional doorbell with brass tubing to get amazing, rich sound. Our Battery Operated Door Chime from Dimango has CD quality sound while remaining completely wireless...

• Plays three selectable sounds
  
  
  
  
  
  1. Ding Dong
  
  
  
  2. Dong
  
  
  
  3. Westminster Chime Click To Hear Sound!
  
  
  
  



• Set sound conveniently at button

It seems that there is a button on the receiver/speaker. Try press once and see if the sound changes.

Hi

To fix the issue you need to remove the batterys from both the bell push and the bell unit for 10 mins, then replace the batterys and then push the bell push so it can switch channels and be different from the house down the road

The chimes have jumper plugs to select the preset songs.

You CANNOT load your own like cell phones allow.

The doorbell buttons and your receiver must be on the same channel. If you will get out the directions that came with your unit, they will describe the process to go through to reset the specific "codes" for your buttons and receiver.

are you to take it off the wall
if so it should have either two screws or slide off door

Yes, there is a way to change the security code. See FAQ here:
http://www.heath-zenith.com/servsup_disp_faq.cgi?cat=5

click on "how can I change the security code."

The cadence is different, but you can change all the other rings to a different tone. On a 76xx phone, press PROG and the CO button twice. Press your navigator button up (or down) until you hear the tone you like, then press enter to save.

Tones 01,04 and 05 tend to be reasonable.

Carl