My phone won't ring and has a Do Not Disturb on the screen. This is a GE DECT 6.0 model. I don't know how it was set to Do Not Disturb...and need help clearing it.
SOURCE: GE Cordless phone "Do not Disturb" setting
There is a button on the main base that says " Do not disturb" my 4 year old son must have pushed it. It was an easy solution.
Thank you!
SOURCE: GE cordless dect 6.0-do not disturb
According to the instructions, you only need to press the "do not disturb" button again. The button is on the base (not the phone).
SOURCE: GE DECT 6.0 GHZ cordless fone (model 28111) don't ring
There is a Do Not Disturb button on the base unit. Press it to turn the feature on and off.
SOURCE: My GE Dect 6.0 model 28821FE2-A quit ringing and
Sounds like you might want to remove the battery for a day to erase the memory and change the phone settings back to the factory settings.
Open up the back cover of the handset, remove the rechargeable battery and leave it disconnected for a full day. Do the same thing for the base unit, they sometimes have a 9volt battery in the base unit.
Hopefully after the phone if reset to factory settings the ringer will work again.
NOTE. you will lose all your speed dials and other custom programming when you do this procedure.
Good luck with the repair.
5,605 views
Usually answered in minutes!
do not distrub is on the screen and phone will not ring. how do you take off the do not distrub
I have repeatedly pressed the D-N-D button but nothing happens. The light stays on and the icon stays on the two phones. Other than the flashing, I have no way of telling when I get a call. Please help...
My phone is a GE 5.8 Digital and the Do Not Disturb is on and I can not for the life of me figure out how to turn it off... Please Help!!!
×