Ricoh aficio sp c410dn error occurred sc 361

Check the Ricoh-USA.com for other drivers that may support this feature.

Quenching lamp error--
lamp is defective
check lamp harness

other models-- transfer belt cleaning error

my dear you chek LD unet

sc270 is an error with the shutter on the laser unit. Turn the machine completely off and then back on -- if the error doesn't clear, the shutter sensor or motor will likely need to be replaced.

The Aficio SP C410DN is compatible with these other printer models:

- Aficio SP C411DN
- Aficio SP C400DN

It is also similar to the Aficio CL4000, but some of the parts may be different.

sc 818
System timeout error
• Defective controller
• Replace the controller if it occurs frequently

Did you follow the instuctions to shake gently then remove all tags prior to placing the toner? Is it a toner/drum unit. look underneath if theres a green drum. After market toner will not work.

Notice what color the dots are. Most of the time you need to replace that color photoconductor.

That crosses over to the Lanier LP226cn.

SC307 - Charge AC bias error [Y] (Level D Error)**

Symptom: The charge current less than 200 ìA is detected.

Possible Causes / Required Actions:
• Defective charge roller
• Defective connectors
• Disconnected harness
• Defective high voltage power 1
1. Check the connectors.
2. Replace the PCU for yellow.
3. Replace the drum positioning plate.
4. Replace the high voltage power 1.

** (Level D Reset Procedure) Turning the main switch off then on resets SCs displayed on the operation panel. These are redisplayed if the error occurs again.

- Lanier Tech

Reaseat the cyan photo conductor