Trouble connecting skartz cable to audiosonic dvd/recorder

If you're having trouble with your Panasonic DVD recorder input not working, you're not alone. Many people have experienced this issue and it can be a frustrating one to solve.
The first thing to do is to check the cables and connections. Make sure that all the cables are securely connected and that the power is on. If the cables are all connected properly, then you may need to reset the DVD recorder.
If the reset doesn't work, then you may need to contact Panasonic customer service. They can help you troubleshoot the issue and get your DVD recorder working again.
It's always a good idea to keep your DVD recorder up to date with the latest firmware. This can help prevent issues like this from happening in the future.

It sounds like you may have your vcr connected via composite cable. Check the back of your VCR and follow the cable to your TV. You should see a Red, White and Yellow connection on both ends. The Yellow connector is the video.

Here is an image to help you find it:

go to inside from DVD, and tigh any ribbon cable, plug or connector and clean it very well with c. cleaner.
Try again.
if the problem persist you have trouble with the Syscom and associates circuit inside , go to the repair shop for fix it.
God bless you

Don't hook the DVD/VCR recorder through ur cable box.Hook the DVD/VCR recorder through ur tv only it should work find.This way each units have it own direct functions to the tv.U recording the shows from the tv not the cable box ok.

first is this DVD recorder? its not okay plug the wires from DVD to tv (left / right and video -digital in or av1 in) cable box is connected to tv (red/blue/green) tv should be on component (source)...to view dvd switch to av1 or digtal1.......if this is a recorder get a coaxial cable and connect from cable box out to DVD in (the TV setup stays the same as above) DVD set up should be on CATV/ch 3..........the out connection is the same as a reg player (see above)

please note in your vhs dvd manual it tells which dvd (maxell, tdk etc.)are compatible with the recorder
okay do you have a cable/satellite box connected to tv/monitor? yes or no

yes- is the the tv on ch 3? cable connected to cable box in, cable box out connected to dvd in,(on dvd set up menu make sure broadcast is cable) dvd out connect to tv... ? please note some dvd recorder will not record HBO (you can record on vhs tape)

no connect antenna to dvd in, dvd out goes to tv.....

hope this help...

I can't get the player to switch to dvd so I can eject the dvd disc

Is the tv a combo unit and has a vcr. well, the way this dvd recorder works it needs the signal of the material that is wanting to be recorded. fortunately it doesn't see anything else without some type of cable of some sort. just with the color cables it just acts like a regular dvd player. the best thing to do is get a hold of a external vcr and run color cables to this dvd recorder and then another set of color cables to your tv and put it on your VIDEO channel. refer to page 34 where it says connections for an external source. it illustrates it will and read carefully. sources: I USED TO WORK FOR THIS COMPANY;)

What is your source signal; Antenna, Cable or satellite?

Try using a diferent rf cables.I would suggest that red,white and yellow colour coded RF cable is still the best.(yellow for Pictuer,White for sound and red also for sound(surround).
had similar problem than i cahnge the cables and found out that it worked with that cable...

thanx,
FIJI