Problem with scanner in 2090 with sc997 code .

Ricoh Aficio 240W Plotter Error Code SC 401-00

Copytechnet https://www.copytechnet.com > forums > 108927-rico...
May 4, 2016 - On old Ricoh Aficio's SC401 used to be a Transfer error, but on the 240 its ID Sensor, could be dirty, could be old Dev, could be a loose ...

Ricoh MP2352 SC401- Strange problem
Jul 28, 2021
Error Code SC-401
Sep 12, 2014
ricoh mp 3352 - error sc401
Dec 11, 2020
Ricoh mp 2851 SC 401
Jul 11, 2017
More results from www.copytechnet.com

Error Codes > Ricoh > MP2553 > Code SC401

Printcopy.info https://printcopy.info > code=SC401
Code: SC401 · Description: Transfer positive electrode current error A transfer roller current leak signal is detected. · Causes: • High voltage supply board set ...

Missing: W2401 ‎' Show results with: W2401

Error Codes > Ricoh > Aficio 2090 > Code SC401

Printcopy.info https://printcopy.info > code=SC401
Code: SC401 · Description: Transfer roller open error · Causes: • Transfer power pack defective • Poor connection between the transfer current terminal and the ...

Check the setting on the software. Check the tab number copies.
If you wish to get some details about Printer repair and Servcie ; check the site linked here. Pull up older posts.
http://electro-medical.blogspot.com/

EDP CODE 885340

Application function selection error
The application selected by a key press
on operation panel does not start or
ends abnormally.

• Download the firmware for the
application that failed
• An option required by the application
(RAM, DIMM, board) is not installed

Re-seat the RAM on the controller board

The finisher for a Ricoh 2090 is not hot-swappable, meaning you have to turn the copier off completely, attach the finisher cable, and then turn the copier on in order for it to correctly recognize the finisher.

The SD card cannot be copied normally , it is usually done only at Ricoh. There may be some copy protection system in it.

Direct from the service manual:

• Controller board defective
• Controller board installed incorrectly
• Operation panel harness connection loose or incorrect

I have sc 548 error code also. I was following your instruction, but i couldn't enter to service mode. How do i prepare it? Please write this instruction to me step by step.

You have to scan each one individually. The machine can scan them into a pdf file. Press user tools button. Press the scanner button and check the file format settings for individual files. Select PDF if needed.

SC997 is an application error that seems to like to show itself on occasion, it's not considered serious. It tends to show up when scanning, and it basically means the copier couldn't do what you just asked it too. A hard power cycle clears it and in many cases it doesn't come back. I would ask your tech the next time he's out to update the firmware. The problem with that though is that your particular model uses the older flash cards to flash firmware and most techs don't have them or know how to use them.