What is the codes to program my charter remote

Charter 1060BC2 and 1062BC3 - Setup

www.urcsupport.com/html.php?page_id=762

SETUP. The Charter 1060BC2 and 1060BC03 Remote Controls are preprogrammed to operate the cable box (converter) provided by your cable system, an RCA TV, a Toshiba DVD player, and a Pioneer audio receiver. To control devices other than the default brands, perform the following steps; otherwise skip this section.

Program the Digital Cable Remote Control

mscharter.custhelp.com/app/.../program-the-digital-cable-remote-control

Dec 10, 2013 - Highlight or write down the codes and device you wish to programbefore moving on to Step 2. On the remote control, press a device key once (i.e., AUX, DVD , AUD, TV or CBL); it will blink once. Then, press and hold SETUP until the selected mode key blinks twice, then release SETUP.

Charter.net Charter Remote Controls - 1060BC2/1060BC3

www.charter.net/.../charter-remote-controls-106...

Charter CommunicationsProgramming Codes: Select the manufacturer of your device from the list. The codes will appear beside the list boxes. Not all manufacturer brands listed may be ...

Charter.net Charter Remote Controls - OCAP-4

Hi Cathy.

If you go to this site
Charter net Charter Remote Controls 1060BC2 1060BC3 and put in Sharp as the TV type, it both gives you instructions on programming the Charter remote, and gives you the codes for Sharp TVs (10818, 10093, 10688, 10851, 11602, 12360 in this case)
Hope that gets you up and running!
D

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Search the site by type in the brand name of your device, in the "Search box at the top right of the Home page display" to see the set-up codes to your device, with different brand remote controls.

Using Universal Electronics Charter Remote OCAP 4 Device, I was able to get the volume control to work using the final code in the code listing, 31933

027,022,018,046,073,082 are the codes to check. If you wish to get more details, check this site. Pull up older posts there. Setup code list and setup proceedings to many popular brand remote controls are given. Three digit, four digit, five digits and two-digit code list are there. Check the site with patience. Surely you'll get a solution to your problem. Search the site by 'Timeslide' option. It will make search easy. Or, type in the brand name to your device into its search box, and press "Enter."

You will need to program it to your cable box to change channels. Remember, the channels in your tv are coming from your box, so if the remote can't control the box, you won't be able to change channels. Call charter for help on programming remote to cable box.

The only option you have left is to do a code search. It varied depending on which Charter Remote you have. I found 5 different remotes for them so instead of putting directions for 5 different remotes I am posting the link to charter. Click the link, scroll down and you will see 5 remotes with set up and user guides for each. If you have problems repost here with your remote model and we can help.

http://www.myaccount.charter.com/Customers/Support.aspx?MenuItem=2&tab=tabeugd

try goldstar codes

I need the current codes to program my remote control for Dish Network

Need to know the model of your charter remote. TV is ILO? OK, we are half way there..