Playstation3 problems Was fiddling with the settings now I have no picture but can still hear clicking after pressing buttons

Use the power button on the front of the console, to put it in standby mode (red light on). Then press and hold the power button until you hear two beeps. This should reset your display output settings.

Hi,

Follow the procedure below to fix the problem on your ps3,

1. Turn off Playstation®3.
2. Hold the power button down; the system will turn on and turn off once again.
3. Once the System has been shutdown, re-press you finger until you hear 2 consecutive beeps
4. When you hear the 2 beeps take finger off power button.
5. You will be prompted to plug in your controller via USB and then hit the PS button
6. The Recovery menu will pop up.

The current Recovery Menu supports:
Restart System: Restarts the PLAYSTATION®3 System.
Restore Default Settings: Reset all system settings back to default.
Restore File System: Checks for corrupt/missing system files.
Rebuild Database: Rebuilds the OS for the PLAYSTATION®3.
Restore PS3 System: Fresh restore; Deletes everything and starts from Scratch.
System Update: Update the PLAYSTATION3 System

Make sure the ps3 is off (red Light) and hold down the power button until you hear 2 beeps and release. There you go, hope that works

Pairing the Headset with a Sony Playstation3 Entertainment System:

To pair your [EM-227] Bluetooth Headset with the Sony Playstation3 (PS3), go to the PS3 main menu, scroll to "Settings" and select.

Scroll to "Accessory Settings" and select.

Scroll to "Manage Bluetooth Devices" and select.

The menu will ask: "The Bluetooth device has not been registered. Do you want to register it?"

Select YES.

Put your [EM-227] Bluetooth Headset into discover mode (see X.XX of this manual for instructions on how to get the headset into discover mode).

Select "Start Scanning" from the PS3 menu.

Once the PS3 has discovered the [EM-227] Headset the screen will read "Select the Bluetooth device to register".

Select [EM-227].

The PS3 will ask for a passkey. Enter [0000] then press "OK".

Now press O (the PS3 circle button) to get back to the previous menu.

Scroll to "Audio Device Settings".

Change the "Input Device" to [EM-227].

Note: "Input Device" is the microphone, how others will hear you speak.

By default, the "Output Device" will now switch to [EM-227].

Note: "Output Device" is the audio, how you will hear the PS3 audio and others speaking.

If you would like to hear the PS3 audio and others speaking through your TV or Audio System, scroll to "Output Device" and switch to "System Default Device". If you would like to hear sound through the [EM-227] headset, then leave the "Output Device" setting on [EM-227].

To test your connection, speak into the headset and you will see the bars above the "Microphone Level" moving. If not, repeat the pairing process.

Press "OK" to confirm the new settings. You are now ready to use the [EM-227] Bluetooth Headset with your PS3 Entertainment System.

For further assistance with Bluetooth settings on your PS3 please refer to your PS3 instruction manual.

Please try the following steps to cure your problem

Step 1. Turn the PS3 onto standby mode (red light on)
Step 2. Press and hold the power button. It will beep immediately when you press it and then beep again about 5 seconds later. When you hear the second beep let go of the power button.
Step 3. Wait for your PS3 to start up

This procedure resets the video to standard definition and should hopefully solve your problem

Hope this helps and thank you for using FixYa

Becoz ur hard disc got corrupted ! But don't worry, U need swith on the PS3 & touch hold both the "Eject" & "Power/Reset" button for 20 secs or until a triple beep sound. It will restart the PS3 with a Message " Press X Button to restore the corrupted data ".. Enjoy.. !! =D

go to your settings and make sure that the microphone is set to headset.

I was taking pictures, then when I pressed the shutter release button, it took a long time. Then the error message came up. I tried pressing the shutter release button again, nothing happens. Still the error message. Please help me

I had the same problem and found that if I went into the options and chnged the format from NTSC to PAL and then back to NTSC it would bring in my camera. Thanks to snrobby for the hint on the options idea.

I'm sure you already checked the connections on both the ps3 and Tv to make sure they are firmly and properly connected.
So, when turning on the ps3, hold the power button for at least 6 seconds until you hear a second beep. this should reset your audio/video settings to normal.

if using HDMI, wait for about a minute for the ps3 and TV to negotiate a connection.