Turn camera off and on again

My Kodak Easy Share C433 camera does the same thing! Does anyone have a solution?
"camera turns on..sometimes turns off again...if lucky will take a picture before it turns off again.. the battery is flashing even though I have just changed them"

-Turn On camera
-Press menu button and look for setup menu
-Under setup menu Look for the word image storage then Press Ok button
-Under image storage choose Internal memory then press Ok Button
-Now if your setting is in internal Memory turn Off camera.
-Turn On camera again
-Press review Button to show pictures in Internal Memory
-Press Menu button then Choose Copy.
-Now under copy wil provide three option copy ALL/PICTURE/Exit
-If you wnat to transffer all the pictures to you memory card choose all if selected picture just choose picture.
-Now your picture in internal memory is in your memory card

_Note; You need to set your iamage storage to Auto again for you to able to access or used the Memory card

I was having the same problem and contacted Casio. The issue seems to be that there are pictures/video on your internal camera memory which is conflicting with the memory card. Here is the fix:
Turn of the camera and take out your memory card Turn on the camera, click menu, setup, hit the up circle twice and click reset and click reset again until the camera resets
Then click menu again, setup, hit the up circle twice and click format, click format again until the camera formats
(This will delete the pictures from your memory card so make sure you have them saved) Turn off the camera and put your memory card back in, turn the camera on again. Repeat the format process for your memory card and you will be good to go!

Hi,
Most common problem in al the digital camera's. Slide motor start malfunction and the massage appears"Turn off the power and on again". In this situation you have to replace slide motor or lens block assembly, And your camera work fine again.
Thanks for using fixya.

try turning off your flash, if its possible... then if it persist again, maybe you have an hardware problem inside you camera

Hello, if the batteries where not fully charged when you where copying pictures to PC, the camera may have corrupted the pictures on the xD card. That is why the camera is showig a grey picture and turning off, it can't work without a valid picture card. A vey good way to restore the pictures on the card is to buy a card reader (they are unexpensive) that can handle xD cards and use a picture restore software.

For the restoration proccess, read the following page:

http://techblissonline.com/photo-recovery-deleted-pictures-corrupted-images/

Maybe you don't need to buy a card reader if your camera is recognized as a disk drive by the computer but I strongly recommend a card reader for future picture downloading to PC.

After recovering your pictures, you have to format your card in order to use it again in camera.

Good luck!

I have the same problem and I suspect that is the contact of the door.

The only thing not functioning was the lens I could turn on off see menus etc but could not take a picture and the lens would not retract - My husband cleaned the battery terminals on battery & in camera -IT WORKED !!!! good as new -

The problem with your camera can be in optical (lens) unit. Part number is: 884875701 If you need more info please advice.