Ls 4000 enter after - Symbol LS 4000i Handheld

To enter service mode press the status key and enter 1087 and then 1087 again. But to login for system settings the User Name is 4000 and the Password is 4000.

could be normal shift timing set by the shifting solenoid's value related to the diagnostic board on the car i noticed some cars will hit that mark before shifting

try reprogrammimg, it should default after it scans an item to enter whaT WAS SCANNED

Download VueSca. It will run your 4000 under Win 7.

Probably the valve cover leaking.

You can download the Vista Driver at this link: 4.0.3 full version - Vista only

If this information was helpful, please give me a big thumbs up when you rate my answer.

That depends on your exact model, it could be USB, Keyboard Wedge, or RS-232. In any case, you just plug it in and turn it on.

should be a good place to start, if condition don't improve call in a trans tech

i have a 90 ls 400 my radio stopped working you can have it reaired or hust get a aftermarket one installed as for the mirror check your fuses

Press APPS and select the Finance app. Select the TVM Solver.

Enter -4000 for PV, 0 for PMT, 6000 for FV. Be sure you use the (-) key for PV, not the - key. P/V and C/Y should both be 1 and PMT should be END.

If you want 5% annual interest compounded month, enter 5/12 for I%. If you simply want 5% annual interest, enter 5 for I%. Go to N and press ALPHA ENTER to see the number of periods (months or years according to what you entered earlier in this paragraph).