Device password requested on 1 or 4 laptops, 1 laptop can wiifii and no wiifii on the others

Hi,

Check the user manual here (link bellow). Hope this'll work. If not, let me know and I'll help you further.

http://manual.buffalo.jp/buf-doc/35012391-1_en.pdf

1. Update your iPhones software.
2. Reset the router and follow the setup instructions from scratch.
OR
1) In your browser type in AP's IP address (default is -> 192.168.11.100)
2) type in root as user name and keep password field blank. hit enter.
3) To connect wireless devices to the AirStation, you may either enter the SSID and encryption key manually, or you can use AOSS.( these settings can be found under wirless config tab)
for detailed information about configuring ap refer this manual
-: http://cdn.cloudfiles.mosso.com/c85091/WHR-G300N_Manual_web.pdf

Try this:

Reset the Airstation to factory settings by holding the reset button until the lights flash (10 seconds).
Once the airstation has been reset, reset it changing your password.
Below are the instructions on how to setup your Airstation.
http://www.columbia.edu/acis/networks/aptnet/buffalo/index.html

Good luck!!

Ethernet gives network signals from computer server with connectivity capacities. Once the ethernet is connected to your computer, once of the computers within the network structure has a modem or signal converter box to capture and distibute signals. Your computer is functioning with ethernet cable connection as arranged default. Recent computers however have wiifii capacities meaning that, the modem box is not ncecssary to make signals recognised. Recent computers have builtin signal recepticles, once the programs wireless features are enbled, any available computer networks aer detected. Howver, the wiifii makes connectivity to networks by requesting password keys if the aletrnate computers have protected the entry. Simply said, your computer is ok to function with ethernet as regular achievement. only when the ethernet is malfunct usually caused by the computer that has the modem disconnecting from yours. Your computer should actually get better networking with only one of the method available either ethernet or wiifii. Attempting to receive signals with wiifii and ethernet at the same time impedes the network speed since the structures may only allow an amount of data passage for each network on the same computer. Use the computer wireless buttons located at the system settings area to disable the wiifii until a computer request within your knownlege request to activate wiiffii. Keep in mind that once your wiifii is enabled, another computer is sharing resoruces makign the computer slower if a password was not set.

There is a great article at Working with Windows Wireless Networks
If you need more help post back! Thumbs and testimonial are welcome!

You can find the driver in the Buffalo download archive for older products:

http://site2.buffalotech.com/support/downloads2.php

Choose from the menu.
You also find manuals and set-up guides there.

If you have any more questions, just come back here and leave a comment - I'm happy to help.

Good luck!

You're just stupid!

If it were me, i would return the airstation. then i would buy a linksys WRT54G. They are about 50 dollars. Then use that to set up your wireless network and you will find it quite easy.

connect your computer straight to your internet modem.

If it works then connect the router after reset....
read the manual..if it does not work then return your router and get a new one or simply buy netgear..has been working for me Without problems for 4 years other than two years ago got fried due to electrical over charge

I have just had exactally the same problem,
Right, what you need to do is, go to "help & support" for the start menu, when that has loaded search device manager.
Then click on the first [yellow] question mark you see under "network adaptors". The it will come up as, a property box, then click re-install driver, during the process of re-installing a box will appear, like mine did as we both have the same computer/laptop,saying something like; "window's dose not support this" there are 2 options continue installation or stop, click continue & then go to client manager and see wether your wireless card been picked up, if that failed try clicking other question marks & re-installing then. It may be related.