Menu button doesnt work

Though they put all the buttons in at production of he vehicle, this is an option that you have to have the bells that go with it to use it. These are add on options that you can acquire or purchase from your local Mini dealer.

Click the "Messenger" menu in Yahoo! Messenger and select "Connection Preferences."

2. Enable the "No network detection" option and then click the "OK" button at the bottom of the window.

3. Yahoo! Messenger will ask you if you want to sign in again with your new proxy settings. Click the "OK" button.

4. Enter your Yahoo! ID and password and click the "Sign In" button.

you may have a registry problem download reginout to fix the issue

i would recommend a reset note however this will most likely to cause you to lose the data and that you should back it up before.
hold down the "select" and the "menu" buttons together until the apple logo pops up.
if this doesnt work then lets try a hard reset To reset an iPod with a Click Wheel, including: iPod nano (4th generation) iPod nano (3rd generation) iPod nano (2nd generation) iPod nano 1. Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.) 2. Press and hold the Menu and Center (Select) buttons simultaneously until the Apple logo appears, about 6 to 8 seconds. You may need to repeat this step. Tip: If you are having difficulty resetting your iPod, set it on a flat surface. Make sure the finger pressing the Select button is not touching any part of the click wheel. Also make sure that you are pressing the Menu button toward the outside of the click wheel, and not near the center. If the above steps did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep. if that doesnt work take it to a store that sells them and see what they say. If it is under warranty get it repaired for free. If it is not look into how much it will cost to have it repaired versus replacing and figure out what is more cost effective. Yo0 can also get it repaired by people online for cheap who guarantee there work. click here for ipod repair
if you need further assistance on any of the steps please let me know and i will be glad to assist you. Thanks and have a great day.

You will find that in control panel . firstly, click on start menu from there click on control panel and then click on sound amd audio devices after that you will find a pop up menu where you will find place volume icon on the task bar then click it to check it and click the apply and then ok. you will find it back on the task bar ok.

try to rehot CPU if doesnt work change it

try dismantling your psp and see the inside of it, you said you cleaned the buttons. try to see if the chips inside the psp are sort of dirty and stuff, the access points in wear the buttons touch, if this still doesn't work, just go to a original SONY STORE.

you should reboot your ipod, here is how you go about doign that:
Open your apple software on your computer.

Plug in your iPod into your computer, and that the plugs are secure. Your computer should detect your iPod, black screen or not.

Take your iPod and put it on your desk or a flat surface.


Firmly press the middle button, and the menu button. It will read menu on the top button of the click wheel, and the center circle of your click wheel is what your looking for.
- Make sure your fingers are planted on the top of the center button
Then count to 8. if this doesnt work try it a few more times. if that doesnt work then i'd bring it in for some repairs.
I

The TV is in 'showroom mode'. To fix: Click: Menu --> Picture --> Mode --> Power up then select: Home. Then click menu until you exit the settings. You will now be able to use the sleep timer.

You need to open the remote unit and clean the touch pad contacts and the circuit board contact points with pure isopropyl alcohol.

Grease may have worked itself into the remote an has caused those button contacts not to produce the data signals.

Sounds like you are doing it right, but just to make sure:

1. Press (but do not hold) the menu button.
2. Press (but do not hold) the "0" button. This should bring up a "Service Menu" box with 6 question marks.
3. Press the "0" key 6 times.

As far as I know, this is the only way to get into the service menu.