When i press the power button,the lense would come in and out, the screen displays blurry and would turn to display to blue screen with error code D: 3408,5f08,5f0a,5f08,5e02. then after a few seconds it will shut off. does anybody knows about the error code above? is this a known issue on this camera model?
The lens open halfway, the picture on the LCD is blurry and one second after the lens close and an error appears of the screen saying "D: 5f08 5e02". what does this mean??? can you help me fixed this one??
Shaking during switching is the right thing to solve the problem..... I The gear mechanism of the camera lens are out of phase and when you shake the camera the gears goes in the right position and it work.
I just fix my mju-700 right now with shaking it.
I think this is a problem with all MJUs.
I have the same problem with louise68 re Olympus digicam 700. It would turn to display ble screen with error code D: 5f08,5e02. What's wrong with my camera? Please give me a solution.
Yes
Por favor tengo una olimpus stylus 710 y aparece la pantalla azul con el error 5f08 5e02 5f08 5e02 se abre y se cierra la lente y nada vivo en cordoba arg. alguien me puede decir que joraca hago con este problema?
[email protected]
0351-156140157
I had the same problem. i tried a lot of different things. after playing with the problem for about 2 hours, i decided to connect it to the computer. at first the same thing happened, funny noises, lenses coming in and out, and the 5f08, 5e02 message. tried again, and it let me download my pictures. i opened the olympus master software, and in the main menu there is a update software and update camera options. i did both of them. after that, i unplugged my camera. then i turned the camera on and it magically started working normally again. i hope it stays working ok. i hope this will help
SOURCE: Olympus Stylus 710 Error: D: 5f08 5f0a 5e02 5f08
i have the same problem with my camera it show 5foa 5f08 5e02 with the blue screen
SOURCE: Olympus Stylus 710 Error: D: 5f08 5f0a 5e02 5f08 5e02
this is the most common problem with the olympus cameras the lens has been knocked and by you pulling on the lens it sounds like you have done some damage to the motor that bring the lens in and out thats why its making that noise what you needed to do was move the lens either to the left or the right you will no when its fixed because the lens just pops out and the camera will be fine this works every time i just hope you havnt done to much damage alredy goodluck
SOURCE: WHEN I TURN THE CAMERA ON, IT IS STUCK ON A BLUE SCREEN
a minha maquina não esta ligando, quando vou ligar ela aparece um codigo 5f08 e embaixo 5e02
SOURCE: I turn the power on and it makes lots of noises
It is stuffed up if you have warrenty get it repaired if you don't it may cost the same price as the camera so goodluck:) i hope this has helpd and please rate this solution...CYA
4,921 views
Usually answered in minutes!
Blue screen appears all on a sudden. D: 5f08 & 5e02. Battery pull out & insert. xD card pull out & insert. Battery charge & insert. But in vain. Same alarm. Plz help me & tell me how to fix.
When I press the power button, the lense would come in and out; then the screen displays blurry and would turn to display a blue screen with error code D: 5f08, 5e02. Then after a few seconds it will shut off. My camera isn't working and I can't find any solutions... please someone help me????
D: 5f08, 5e02
:(
we have the same problem louise68..
same problem as louise68's.
same problem as louise68's.guarantee off
I have the same problem with Louise..
Can I have the best solution please send it to [email protected]
thank you very much.
Please help me coz this cam is not mine, I just borrowed it
I was shocked because I did'nt expect that it,s as sensitive like this..
I have problem 5e02...and my computer dont see camera... I can not update software and update camera options
I have a µ-mini DIGITAL S with the code D: 5E02, alle new picture taken are black and only black, so I think it is the CCD
When I press the power button, the lens come out and the view is blurry, within seconds the lens retract and a blue screen is displayed with the following error message: D: 5 f08 5f0a 5 e02
When I press the power button, the lens extends but the view is blurry, within seconds the lens retracts and a blue screen is displayed with the following error message: D: 5 e02. After a few seconds it will shut off. My computer don’t see camera and I can not update software or update camera options. Kindly help me fixed this one.
When I press the power button, the lens extends showing a clear view at first then within seconds the lens moves in and out and the view turns blurry then a blue screen is displayed with the following error D: 5 e02. I can’t upload pictures… my computer don’t see camera
I have the same problem with my u700...error code 5e02.
I just already try the solution given by shaking my camera but its still not working and my camera is still malfuction.
I have the same problem... I´m spanish so...
I have found the solution to the problem... but it´s in spanish:
http://ar.answers.yahoo.com/question/ind...
×