No remote trying program my antennea channels,cant switch from video 2
If it has a MENU button, press it and use the volume up and down to manipulate the choices, press menu again when you get to channel setup. you want AIR if using off air or Cable for cable. Next screen should say start and press menu again, the channels will start to cycle. If htat doesnt do it, you have a new model than the one I just did tonight. OneForall remotes will probably not have the setup button you need to autoprogram. Best bet is to find a Sanyo made universal remote or other Sanyo remote on Ebay as alot of the buttons are proprietary to manufacturer. Some TV's are useless without their own remote if not on a external tuner (cable SAT or digital)
Get yourself a universal remote, program the TV and you'll be in business.
If you want, and I'm not endorsing anybody or anything, but one site that comes to mind is http://www.oneforall.com. The thing I like about this brand of universal remote is that they have a wide range of remotes (pricewise) and you can just about always find the codes for your equipment. And if you happen to lose the booklet, you can always go onto the website and look it up. Hope this helps.
×
1,563 views
Usually answered in minutes!
×