The screen flickers a bit when I plug it in. Sometimes, the image is perfect. But then, half of the screen becomes thin vertical colour lines. If I unplug and replug the screen, or change the definition of the screen, it may get back to a good image for a while, and then the problem starts again. What is the problem here please?
Hello, there is a problem with your monitors picture tube. May be it might have been damaged as a result of over power or even because of over use. Just try to change the picture tube or change your Monitor.
SOURCE: Blue/black vertical line in the middle of screen
Sounds like a bad connection on a ribbon cable or plug comming or going to the LCD display. This is something you should not try to fix as these circuits are very very fradgile and you can easily break or tear a ribbon cable . Call the manufacturer to get a tech to assit you. Good Luck
SOURCE: Scrambled Image at random intervals
it sound to me like a power supply problem, but in this tv most be a ribbon cable one, any way you need a tech, regular people cant do nothing in this case....good luck
SOURCE: LCD 19" Samsung - one half od display has yellow vertical lines
Vertical lines are typical of LCD panels that have failed. I would certainly try the monitor on another machine; however, if the problem follows the monitor this is probably going to require some repair work. Unless you have the tools and skills to work on fairly delicate and potentially dangerous components this will be a job for an authorized repair shop. If you have any more questions let us know otherwise please don?t forget to rate this post.
SOURCE: color and other problems with SyncMaster 910 MP monitor
Go to => http://www.samsung.com/us/
Type 910mp in the search dialog box.
Select Download English Manual. It's about 20mb.
The manual has instructions for setup including adjusting your monitor. There is even a section troubleshooting and a self-test. Good Luck.
SOURCE: daughter sprayed water on samsung lcd 32 inch on the front panel
electric and water are a bad mix as you know my advice to you unplug tv put it in very warm room for about 3/4 days do not plug in hopefully it can be saved.adrian
Your display may be flickering for several reasons. You will want to take the following steps to rule out the most common reasons for the display to flicker:
1. Reseat all cable and
connections to the television from your devices. Physically remove the
cables from both the television and the device and reconnect them.
2. Check your Advanced
Video settings in the Vizio TV menu some of our Vizio televisions will
allow you to adjust the following settings under the Advanced Video
settings:
Ambient Lighting
Backlight Control
Advanced Adaptive Luma
If you have any of these options available please turn all of them off to see if this resolves the display flickering.
If the above steps have not resolved the issue please take the following steps in the order presented:
1- Power off TV
2- Unplug TV from outlet
3- Press and hold in the power button on the TV for 30 seconds (while it is unplugged from the wall)
4- Release the power button
5- Plug in the TV into a different outlet
6- Power the TV back on
There
is also a factory reset option in your menu under the SETUP section. It
will say either "reset all settings" or "system reset". We recommend
that you reset all settings as well to see if this resolves the issue.
If this does not resolve your problem please contact our technical for
further assistance.
If the line stays in the same spot when changing the above settings please contact our technical support.
114 views
Usually answered in minutes!
×