MODEL # 110.60922990 THE DRUM WILL TURN, BUT NO HEAT. WE ARENT SURE WHERE EVERYTHING IS LOCATED AT TO FIX THE HEATING ELEMENT OR THERMOSTAT. PLEAS HELP IF YOU CAN. THANK YOU!!!
SOURCE: I NEED OWNERS MANUAL TO KENMORE DRYER
thiknin you need a service guide , not owners manual( only tell how to operate} ther is a schematic/ wiring diagram locate with inthe console itself usually taped to the back wall behind the timer
7,797 views
Usually answered in minutes!
I FOUND MY OWNERS MANUAL, BUT ITS NO HELP. I WANT TO KNOW WHERE THE HEATING ELEMENT IS BEFORE WE TEAR IT APART. NO PICS OR INSTUCTIONS ON HOW TO FIX THE PROBLEM. IT TELLS ME REPLACE MY FUSE, BUT WHERE IS IT TO DO THAT? DUH!!! I HAVE ASKED OTHER PEOPLE AND THEY ALL TELL ME DIFFERENTLY.
Drum turns and there is a very slight amount of heat so I am having to spend 2 hours for a normal 40 minute load to dry
Pop off the cover below the door. There are two spring clips to undo and then the front cover will fall towards you then lift it off the two bottom posts. The heating element is behind this door.
turns on but does not heat
Got a new element and have taken the back off, unpluged all wires and cant get element out of casing. The screw that,in my opinion,would be the one for element to slip out backwards and need to know if it is it.
need a picture of how the thermostat is supposed to be oriented
I also need to replace the fuse for the heating element.
what size wiring do I need install a dryer
we have the same problem,drum turns perfectly,but no heat.Most likely the heater block/coil inop.Can't find owners manual.Hope you can help,also where is the coil located.KENMORE h/d soft heat 70 series electric- Serial # is -ME3429745 model# 96573220 65732.
Thank you.
Vito D'Angelo
My dryer will turn on but I have no heat. I am unable to look at a manual because i dont have one. Any suggestions?
×