Tries but never boots up

Hope this works...


What do do if forgot my password to unlock to my tablet

Is wifi turned on on the tablet? If not, go to Settings>Wifi and turn it on. The device should then automatically scan for networks.

If you are able to connect to your network but then cannot actually get to the Internet you may just need to restart your router. You might get something like "Obtaining IP address" for a long time and then get "Limited" connection. Correcting this may be just a matter of unplugging it for about a minute then plug it back in. Wait 4-5 minutes for the router to boot up completely then try connecting again. Some routers are sensitive to new devices. When I had AT&T Uverse router I would have to restart it every time I tried to add a new wifi device.

Hope this helps.

power it off ,
remove any sims
connect usb to pc an try to power up an force debug mode.
its kinda random so try several times .

Restart the device and power it on while holding the power button and volume down until the boot screen clears, keep holding the volume down key as this will allow you to get to the root settings and wipe/cache partion resets and delete user install data. :-)

I would reset to factory defaults(in the manual or online). It usually takes a long time on the first boot, but it shouldn't take that long. Another thing to help speed it along is to ensure that the battery is fully charged and leave it plugged in while booting the first time.

Press power and volume + together until reset screen comes up then select factory reset!

turn it off. if you can't then their is a reset button on the side where the charger is. Get a safety pin put it in the hole. You will know if you reset it. It will reboot. It won't effect your files or info. I hope this helps!

Its a common problem with tablets and not easy to fix.
Your tablet has a corrupt os and is caught in a boot loop.

There are fixes but not easy for a beginner.

Boot into recovery mode by pressing the power button and holding the down volume button in then select restore tablet from the recovery menu.

If you can power it on go into settings then backup and reset. This will reset tablet to the out of the box status. You will loose all of your data. If it will not power up, press power and volume up while booting till the screen comes on.Boot options will come up then reset. Be sure the tablet is fully charged.

my table resets up on ever boot , you have to renter all the info every time you boot it up, Trio G2 10in