Question about Mtd 22" Yard Machine Push Mower

2 Answers

Yard Machines 22 inch mower, I dumped it on its top over the weekend, bent the blade, replaced it, now wont start, did leak oil out of the air filter, cleaned it out real well still wont start

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 284 Answers

If you bent the blade most likely you bent the crankshaft too.
Remove the spark plug and pull the rope and remove excess oil from the spark plug hole
check the spark plug for spark if you have none then a flywheel key is sheered a more in depth fix.
If you get it started you may notice a whole lota vibration due to a bent crank shaft or maybe not?

Posted on May 25, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Husqvarna leaking oil from air filter. Is a 7021F self-propelled

Posted on Jun 13, 2013

Ad

1 Suggested Answer

Anonymous

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My yard machines by mtd mower model number 11a-b13l029 won't start?


Fuel must be less that 30 days old! Air filter OK? oil level OK? Is the shut off cable streteched, If it is then is makes contact and will not allow the engine to start.

May 15, 2014 | Mtd 22" Yard Machine Push Mower

1 Answer

I RECENTLY BOUGHT A PUSH MOWER AT A FLEE MKT..NEVERNHEARD OF A QUATTRO MOWER...IT HAS A 22 IN BLADE..I HAVE AN OLD 21 IN BLADE FROM A L-BOY..CAN I USE THAT ON THIS MOWER OR MUST I BUY NEW 22 IN BLADE ???...


i just looked up Quattro mower they are a 4 stroke engine and yes i would buy a 22 inch blade but be sure it fits this mower PS go to wall mart and check out their blades they are reduced now.

Sep 09, 2017 | Yard Machines 158cc Push Lawn Mower #11a...

1 Answer

I recently changed the blade on my 22" Yard Machine push mower. It is a 22" blade. A bunch of oil spilled out of it when i turned it upside down and it was replaced. Now the chord on my mower is...


it will be o.k. theres just some oil in the combustion chamber making it hard to compress the air,when it starts there will be a lot of white smoke,thats just the oil in the cylinder burning away/off then you will be o.k.just make sure its close to the full mark before you start it and after you shut it off and it has set a while to drain back to the oil pan

Aug 04, 2010 | Mtd 22" Yard Machine Push Mower

2 Answers

MTD Yard Machines 22'' mower, pull cord won't extend


From what you describe it sounds like the line may be tangled, remove the rewind housing in order to inspect the line up close.

Jun 03, 2010 | Mtd 22" Yard Machine Push Mower

1 Answer

I have a gas Yard Machine Lawn Mower by Briggs and Stratton. I cannot keep it running and it is loosing oil. What do I need to do?


May be time for a tune up. Replace spark plug, air filter, change oil and sharpen blade. You may have some water in your gas. I would check to see where it is leaking oil. It may be the oil seal on the pto(bottom) side of the engine leaking and needs to be replaced.

Oct 03, 2009 | Briggs & Stratton Lawn-Boy Insight Series...

1 Answer

Riding mower will barely move


Sounds like it time for a tuneup. Air filter changed, Spark plugs replace and oil changed, plus sharpen the blades while you are at it.

Sep 26, 2009 | Mtd 22" Yard Machine Push Mower

2 Answers

I hit a rock and bent the blade on a yard machine. Replaced the blade and tried to start the mower, but the start rope doesn't come out all the way and recoils hard as I'm trying to pull it out.


I did the same exact thing over the weekend, try adjusting your new blade unscrew the main bolt to the blade about 1/2 turn that should get it spinning again, same exact thing happened to me. Good Luck

May 17, 2009 | Mtd 22" Yard Machine Push Mower

1 Answer

Cannot pull rope out to start mower


Bad news , Mower has sit up too long and the piston / crankshaft has become rusty and froze in place. (fix) buy some liquid wrench it comes in a can at your local hardware store...Tilt the mower onto its front wheels and remove the spark plug. Fill the Cylindar with the oil and leave it for a couple days. after a few days lean the mower back and attempt to pour out the left over oil. Then (Check Your Oil level) preferable replace old oil and pull choke..and start mower...if the engine is still frozen (Buy a New mower) 125bucks Sears.

Mar 22, 2009 | Mtd 22" Yard Machine Push Mower

Not finding what you are looking for?
Mtd 22" Yard Machine Push Mower Logo

666 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mtd Garden Experts

dannydoesita

Level 3 Expert

775 Answers

Joseph Mueller
Joseph Mueller

Level 2 Expert

346 Answers

p38arover

Level 1 Expert

32 Answers

Are you a Mtd Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...