The REAL fix described here. I saw a couple posts that said put a heating blanket over control panel and viola, it did fix, temporarily. Well that told me it was a temperature sensitive component. There are 2 fixes. If you are not handy with electronics then just replace the control board. that is about $140. If you know how to solder, the faulty component is a 3300uf 16v capacitor on the the control board. replace that fro about a dollar and the problem is GONE. I used a pinpoint heat gun to narrow down the actual component and saved $139. Good luck. Still a reliable dryer!
Our dryer just keeps running and doesnt not shut off after cycle is done. You have to unplug or open door for it to shut off. This is not a refurbished dryer we had bought brand new
SOURCE: Maytag Neptune Dryer Won't Heat up
these particular dryers have issues with the heat coils,
it probably has a bad element
SOURCE: My Maytag Neptune dryer flashes an 88 when I push
lack of power did you recently have a brown out or power outage that may have messed up the breaker in the fuse box box
Richard
Roth
The FixYa Team
3,322 views
Usually answered in minutes!
×