Sir,
I, have developed my application on windows 98 but now a days everywhere set the WindowsXp but my printer Epson LQ-2090 have not a Custom paper setting. Please tell me how I can solve this problem for WindowsXp using printer Epson-LQ-2090. immediately
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
make and model of machine please? it depends on if you are printing or copying to the special media. there are settings on the control panel as well as in the print driver to select special media types. beware of "plastic sheets" and any coated paper if you are using a laser device that has a fusing unit that heats the media to fuse the toner. using the wrong media can cause major damage.
Sounds like your top margin is not either not set properly or your documents do not have page feed command at the end. Are you sure you have the correct driver installed?
have you created same paper size as per windows 98 custom paper size ..... if not create as same please create the same and select the printing area also in the server properties ...... in the printing preference change page size to your created page size in layout tab advance option and in paper/quality tab advance option ... and check it ....
Please take note of the paper used. Letter Size A4 or custom. This can be set on the PC (Mac or Window). If not you may just reset the hardware by holding the 1st and 3rd button and then power on. You may hear a beep sound after resetting. Good luck
When a paper jam occurs during printing for some reason, the printer
beeps, displaying the message <PAPER JAM> in the display. When
a paper jam occurs, remove the jammed paper using the following
procedure, and then resume the job. If the message that indicates the
paper jam does not disappear even after removing the jammed paper
following the procedure, there is a possibility that torn pieces of
paper are still left inside the printer. Inspect each part of the
printer again, and completely remove all pieces of jammed paper.
Light Pattern Beep Pattern Problem
Solution
________________________________________________________
* Paper Out light An unknown or serious
* Pause serious error has occurred
** Tear Off/Bin ..... ______________________
*** Font Light Turn off printer and leave it
*** Pitch Light off for several
seconds; then turn
on the printer again
×