I have a three-year old front loading Frigidaire washing machine, I really like it. But, the water level seems too high in the bleach dispenser. It is at the "low" level line for the bleach. Also, water remains under the rubber seal around the door. I worry about mold, etc. forming in this area. Is there anything I can do about either problem?
Did you try taking the dispenser tray apart and cleaning it? The exit ports tend to clog over time. Best thing I have found is to remove the tray at the end of wash day, rinse it out, dry it and put it only partially in the machine, thereby allowing air circulation. Some water will always remain at the end of the wash cycle...inherent in the design.
As for the gasket, you'll have to wipe it down at the end of wash day and leave the door open to dry everything out. I leave mine open all the time.
171 views
Usually answered in minutes!
×