Kodak Easyshare DX4330: camera won't complete formatting mem card

To correct a Memory Card Lock:
one the side of the memory card is a plastic toggle switch, slide it down and up again to reset the switch and then stick it back into your camera.. see if that fixed the problem.

SD SDHC Card Problems and Fixes Card Locked Card Error No Memory Card...

Your 4G card is probably an SDHC card which won't work in your camera. It only takes SD cards.

Hi, The reason neither 4GB card will format is because that camera is only able to support, at most, a 2GB card. I'd suggest returning the 4GB card and getting another 2GB one.

This error message means that the card is corrupted or formatted for another digital camera. Turn off the camera. Insert a new card or format the card.
Try to format the memmory card using a card reader and the PC this should solve your problem if not you have to replace the memmory card.

Hi, try to format in a pc if does not possibel replace the mem. card.

The DX4330 uses SD cards, not SDHC cards. While SDHC cards will fit into the slot, they are electronically incompatible and will not work. You need to go with SD cards 2GB and smaller.

The Z612 works with SD cards, which max out at 2GB. It will not work with larger SDHC cards.

the 4 GB memory card is not compatible with your KODAK EASYSHARE Z700 Zoom Digital Camera. Your camera can only take up to 2 GB of SD Memory Card.

Here are the steps:
1. Make sure you will install a new or fully charged battery/batteries into your camera.Pls. use lithium batteries Ni-Mh or rechargeable Batteries (2000 M.Amp or higher).
2. Clean the battery contacts.
a. Remove the battery/batteries and the memory card from your camera, then wipe the battery contacts with a soft, clean cloth.
b. Reinstall the battery/batteries into your camera
3. Without the memory card,turn on your camera. '

Note KODAK no longer repairs this model. Instead they offer a Trade up option where they offer to trade the model for a newwer model 25-20% cheaper than the market price.

Contact KODAK:
http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490

if you have a computer with a card reader, use it to format the card...it's much more powerful and faster than the camera's internal processor.