My surface 2 will not turn - Microsoft Surface 2 with 32GB

You should have had in the box with your Surface 3 Tablet a charger. It will have a plug with 2 points that is for your power plug, and at the other end you will have a natty little flat magnetised plug for the side of your Tablet. Mine is at the bottom right slot, looking at the screen of your Tablet. Now when the power is turned on, a small bright light will glow. That is now informing you that the battery in your Surface is being charged. Now at the bottom right of your Task bar, that is the Bar on the bottom of your screen where you can place program short cut Icons for your convenience. Now the speaker Icon which is there toward the right-hand side and has a cross if off, or a different look when on. Now the next icon on its right is the one that tells you how much charge is in the battery, if you touch it, it will come on to the screen informing you how much charge you have in the battery. If I'm using my Surface a lot and I do I keep it on charge while I work as a precaution to keeping my Surface well topped up. Hope this helps.

Yes it should drivers, that's what make everything work. When you do an update Microsoft will at some stage include Driver updates as well, that is why Updates are so important as they keep your Tablet computer, working as it was designed with the improvements to the system over time. Now I started with a Surface 2, and then over time I upgraded to a Surface Pro 3, then a Pro 4, which I have at the present time. I made sure mine had 16 gigs of memory and 256 gigs of storage which I find is all I need as I use an external drive of 1 Terabyte for storage. I also found over time that if the charge is dropping while in use I just put it back on to charge to keep the battery well charged at all times. By doing all these regular housekeeping duties with the Surface, they have never let me down. I like my Surface Pro 4, you probably would to, but now they have Surface Pro 6's on the market and they are just the best of Tablets that you can buy, even though a tat on the dear side, but that's what you get when you buy Quality. Best of luck.

If you have a Surface RT you can only go through the Windows Store and search for "Netflix", then install it. You can also always just to go www.netflix.com from your device and log in to enjoy your Netflix.
If you don't have the RT version, you can just download the Netflix application from www.netflix.com and run it to install.
Happy Netflixing!

Surface 2 have drivers?

If so, then if u can get into I, u may be able to try and install them, if it's not the Intel ones
Then I guess the best option I can think of would be, if your wanting to use the data sim, have a look online and see what 3g stick is comparable with surface 2, then from there
You could get an unlocked one or same brand as simcard provider and try that,

Sometimes there's comparability issues with these things.

Hope this helps somehow :-)

1. Assume battery has sufficient charge
2. Assume no physical damage to unit, liquid, dropping etc
3. When turned 'on' can an updated OS be installed?
4. Any other faults or problems noticed?
5. Remove all peripherals and reboot
6. Go to this link: www.microsoft.com/surface/en-gb/support/warranty-service-and-recovery/surface-wont-turn-on

Good luck.

I assume it's not a surface PRO 2 but just a regular Surface 2. The surface 2 runs Windows RT which only runs specials apps designed for it. It can't run software that is made for regular Windows computers. Unless garmin creates specific software for Windows RT I'm afraid that it might never work.

You can attempt the software found here: http://download.garmin.com/omt/express/B/GarminExpressInstaller.exe but I doubt it works.

What you're trying to do it akin to runnign iPad apps on a Mac, it doesn't work before the architecture is different.

To reset your Surface without logging in, please try the following:
1. Attach your Touch Cover / Type Cover
2. Power on your Surface
3. Press and hold the Left Shift key at the Login screen
4. Press the Power icon
5. Press Restart

Your surface should boot to a light blue screen with some options on it.
1. Click on Troubleshoot
2. Click on Reset your PC
3. Follow the prompts. Let me know if this does not work for you.

Check your manual or search on Microsoft forum to see how you can stop the change. Unfortunately with the apps, this is dependant on Microsoft releasing software/apps that work on the tablet.

This is on Microsoft. Until more third-parties start developing apps for the device, this will not be fixed.