Check the door switch. A little lever sticking down through top right of
door opening. If it is not there you will need new door switch(sometimes
the little lever breaks off). If it is there and does not click when you
press it in you need a new door switch. if it clicks when you
close the door then you have a bad thermal fuse.The thermal fuse is
found by taking the back of the dryer off. The fuse is an oblong white
plastic piece with 2 wires attached.
Door switch part number 3406109
Thermal fuse part number 3392519
Hi if this a whirlpool model, try this.
Normal
0
Hi, UNPLUG the dryer! Remove the rear panel of the dryer and
locate the fuse. It is white and ¼” wide and 3” long. It is located on the
blower housing. Remove the wires and check to see if it has continuity. If it
does not, you need to replace it.
Please let me know if this help or if I can assist you
further.
Thanks
Vic
78 views
Usually answered in minutes!
×