NOT OPEARATE WM AWOE 9558S

open the bottom tray door on front panel 3 screws on bottom front.
clean out the trap

Sounds like you may have dry joints on the circuit board, you will need to contact washing machine repairs, not something you can fix yourself

it sounds like your door switch need replaceing ok

Check this link for spares and tips to replace: bearing replacement

MY MACHINE HAVE STOP AT THE MIDDLE OF A PROGRAM AND ALL LIGHT IS ON ANIT SHOWS F 27.PLZ TELL ME WHAT IS THE PROBLEM.

Hi from retired Englishman in SW France,

Sorry but with such a fault it is extremely difficult for anybody on this forum to remotely guess what is wrong with your washer.

It could be internal wiring/plugs sockets, control panel switches, control PCB.
I fear that your only real option is a service call as the engineer will have the right equipment to safely diagnose what is wrong.

If this has assisted you please consider a 4 thumbs up for the rating.
Thanks and good luck!
John C

please let me no how to opearate? my problem is that i dont no how to enter the threading in sweing for prolectrix 8 stich machine.

take the kick plate off the pump is there

Hi, I have exactly the same problem. Did you ever get a solution to get the door open manually?

u can operate without sim