Turn flash on panasonic dmc fx3

SOURCE: Need to replace the lcd in lumix(panasonic) dmc-fx3

ebay seller rongyuanxie about 55.oo or do an ebay search with these key words... FX3 LCD DISPLAY SCREEN
hope this helps...

SOURCE: My camera turns on but it DOESN'T work properly..

Hi,

Please change the internal back-up battery it can be empty!

regards,

Rob

SOURCE: please turn camera off and on again

The message appears when force has been applied to the lens.

SOURCE: my panasonic lumix dmc-fx3 camera does not turn

Your problem may be due to corrosion on the battery contacts inside the camera which can prevent the full power of the batteries from flowing into the camera. Try this free fix before you do anything else: remove the batteries and wipe the camera contacts firmly with a dry cloth (heavy corrosion may require cleaning with a wire brush, steel wool, or sandpaper). Remove any residue that may have fallen into the battery compartment during cleaning, then wipe both ends of the batteries and place them back in the camera. This cleaning clears the problem about 90% of the time. If it doesn't work for you, your camera may have a problem that requires professional repair.

SOURCE: Should you use an 8gb sd memory card in a

Hi,

The manual lists the following SD cards compatible:

4 GB SDHC Memory Card
2 GB SD Memory Card
1 GB SD Memory Card
512 MB SD Memory Card
256 MB SD Memory Card
128 MB SD Memory Card
64 MB SD Memory Card

An 8GB card may or may not work. If you try it, make sure it is an SDHC card. (Note: HC=High Capacity)

Thanks for using Fixya.