CAMERA ERROR #E21 - Kodak EasyShare M1093 IS Digital Camera

https://www.youtube.com/watch?v=3R_RYO6jSOs
E21. Canister fill pump triac faulty. Possible fault Wiring faulty; Electronic board faulty.
https://www.how-to-repair.com/help/e21-e22-error-code-tumble-dryer-pump-fault-aeg-electrolux-zanussi-etc/

i only find e21 error for hoover washers...

The error means, the device is not ready. The link might be of help

It is the customer fault code. Simply turn on and turn off appliance.
E11 - problem with fill water
E21 - problem with draining water
E41 - door open
All other errors require service staff !!!

Manual says E21 is 'Off Line'. Not much to go on there but I am guessing that is probably referring to something that is plugged into the serial ports on the side - perhaps it is looking for an external kitchen printer of something along those lines.

Hi,

this is a hardware error and your camera needs a repair. You have to call Kodak for a repair under 1-800-235-6325 or you can go through the step-by-step solution under www.kodak.com/go/itg.

I have the same error "E21" any help out there?

Just saw your problem! 'E21' refers to Document Board Motor Problem' Check if there is any loose contact and if required replace motor.
S. Mohan, Chennai, India

Having had it for half a year - how come no warranty? If you acquired it through regular means and still have purchase documentation then back to the retailer it goes. The problems you mention are definite - firm ware errors and seller/manufacturer responsibility. Suggest you also contact Support on Kodak website to discuss the problem - you do no have to discuss source if that is an embarrassment.

On my LS 743 Kodak Camera, that error refers to a lens mechanism problem. I was able to fix it by removing my front cover which had be come dented inward and short circuited some wiring. Re-shaping the cover fixed the problem. This will probably void your warranty...