How do I delete IOLO from my comput - Ahead Software Nero 6.0 (60045) for PC

https://windowsreport.com/class-not-registered-windows-10/

I went through the registry and searching for 'iolo', I deleted all references. Then deleted the files under program files. This worked. I tried going to the hex keys by themselves and that did not work. But I was deleting System Mechanic and Not "PRO".

This is gonna be Lengthy process.

First
Uninstall System Mechanic Professional
Open the Control Panel by clicking:
Start>Control Panel
or
Start>Settings>Control Panel
Open Add or Remove Programs.
Locate and select the entry entitled iolo technologies System Mechanic Professional
Click the entry’s corresponding Change/Remove button.
Follow the on-screen instructions to uninstall, restarting the computer as prompted.
Remove the System Mechanic Professional registry entries
WARNING: Using the Windows Registry Editor incorrectly can cause serious problems and may result in an inoperable operating system. Use Registry Editor at your own risk and discretion.
Click the Windows Start button.
Select Run.
Type regedit in the Open field.
Click OK.
On the left-hand side, expand HKEY_CURRENT_USER by clicking the + symbol next to the entry.
Expand Software.
Expand the iolo folder.
Navigate to the System Mechanic Professional folder.
Right-click on the System Mechanic Professional folder and select Delete.
Click Yes to confirm the deletion.
On the left-hand side, expand HKEY_LOCAL_MACHINE by clicking the + symbol next to the entry.
Expand Software.
Expand the iolo folder.
Navigate to the System Mechanic Professional folder.
Right-click on the System Mechanic Professional folder and select Delete.
Click Yes to confirm the deletion.
Close the Registry Editor.
Click Start>My Computer and then navigate to your Local Disk (usually the C: drive) then Program Files\iolo\System Mechanic Professional.
Right-click on the System Mechanic Professional folder and select Delete.
Click Yes to confirm the deletion.
Remove residual antivirus files
Close all open windows and restart the computer

Follow the same process to uninstall the System Shield also.

Reboot the PC after everything is over.

Then install System Shield First, reboot the PC after the installation and check if the update it working or not. Once its confirmed that System Shield's update is working, install the System Shield.

The "the component IoloSystemService" Error message shows up due improper installation of the System Mechanic Pro. Some of the Iolo dependencies failed to get activated and that is the problem.

Now the only solution to fix it is to follow a thorough uninstallation of the System Mechanic Pro.

For WinXP, you can uninstall it from the "Add or Remove Programs".

Next, once its unistalled do not RESTART the PC.

Now, go to the Registry (press "windows" + R to open the run command and type "regedit").

OR

Click the Windows start button and select RUN. Type REGEDIT on the openfield.

On the left-hand side, expand HKEY_CURRENT_USER by clicking the + symbol next to the entry.
Expand Software.
Expand the iolo folder.
Navigate to the System Mechanic Professional folder.
Right-click on the System Mechanic Professional folder and select Delete.
Click Yes to confirm the deletion.
On the left-hand side, expand HKEY_LOCAL_MACHINE by clicking the + symbol next to the entry.
Expand Software.
Expand the iolo folder.
Navigate to the System Mechanic Professional folder.
Right-click on the System Mechanic Professional folder and select Delete.
Click Yes to confirm the deletion.
Close the Registry Editor.
Click Start>My Computer and then navigate to your Local Disk (usually the C: drive) then Program Files\iolo\System Mechanic Professional.
Right-click on the System Mechanic Professional folder and select Delete.
Click Yes to confirm.

Please follow the steps below to perform a thorough uninstall and reinstall of your iolo product. Depending on which iolo product(s) you had, some of these items may not be present.

1. First uninstall anything from iolo from your system and restart the computer.
2. Right-click on the Windows Start button and select Explore.
3. Navigate to C:\Program Files and delete the iolo folder.

**If any of these folders state a file is in use, open your Windows Task Manager and end any iolo processes that are running and try again. Ultimately, Windows Safe Mode will allow all of the folders to be removed.

- Starting Windows in Safe Mode
http://www.iolo.com/customercare/kbarticle.aspx?ID=KBA-01932

4. Once the folders are removed, click on the Windows Start button, select Run, in the Open field type REGEDIT and click OK. This will open the registry editor.
5. Navigate to HKEY_CURRENT_USER, Software and delete the iolo key.
6. Navigate to HKEY_LOCAL_MACHINE, Software and delete the iolo key, should it exist.
7. Navigate to HKEY_LOCAL_MACHINE, Software, Microsoft, Windows, CurrentVersion and double-click on Uninstall.
8a. When it expands, look for any of the following items and delete them should they exist:

{BBD3F66B-1180-4785-B679-3F91572CD3B4}_is1
{78E33B36-2103-49FC-B058-8CF44B6E75FD}
System Mechanic_is1
System Mechanic Professional_is1
System Mechanic 6_is1
System Mechanic Professional 6_is1
System Mechanic 7_is1
System Mechanic Professional 7_is1
System Mechanic 8_is1
System Mechanic Professional 8_is1
DriveScrubber 3_is1

8b. Please also delete these two keys:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ioloSystemService
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ioloFileInfoList

9. Remove residual antivirus files

a. Right-click the task bar located at the bottom of your desktop and select Task Manager.
b. From the Windows Task Manager select the Processes tab.
c. Locate and click on the process named Dvpapi.exe to highlight it.
d. Click the End Process button, then click Yes to confirm.
e. Navigate to C:\program files\common files and right-click the folder named Authentium.
f. Click Delete, then click Yes to confirm.
g. Download and install the Microsoft cleanup utility. You can download this file from Microsoft’s web site at: http://download.microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe
h. Run the utility by clicking Start>All Programs>Windows Installer Clean Up.
i. Highlight Authentium Antivirus SDK and click Remove. Click OK to confirm.

10. Close all open windows, restart the computer & re-download.


Regards

The "the component IoloSystemService" Error message shows up due improper installation of the System Mechanic Pro. Some of the Iolo dependencies failed to get activated and that is the problem.

Now the only solution to fix it is to follow a thorough uninstallation of the System Mechanic Pro.

For WinXP, you can uninstall it from the "Add or Remove Programs".

Next, once its unistalled do not RESTART the PC.

Now, go to the Registry (press "windows" + R to open the run command and type "regedit").

OR

Click the Windows start button and select RUN. Type REGEDIT on the openfield.

On the left-hand side, expand HKEY_CURRENT_USER by clicking the + symbol next to the entry.
Expand Software.
Expand the iolo folder.
Navigate to the System Mechanic Professional folder.
Right-click on the System Mechanic Professional folder and select Delete.
Click Yes to confirm the deletion.
On the left-hand side, expand HKEY_LOCAL_MACHINE by clicking the + symbol next to the entry.
Expand Software.
Expand the iolo folder.
Navigate to the System Mechanic Professional folder.
Right-click on the System Mechanic Professional folder and select Delete.
Click Yes to confirm the deletion.
Close the Registry Editor.
Click Start>My Computer and then navigate to your Local Disk (usually the C: drive) then Program Files\iolo\System Mechanic Professional.
Right-click on the System Mechanic Professional folder and select Delete.
Click Yes to confirm.

Reinstall the System Mechanic Pro

Try to use revouninstaller to uninstall the software, that find left over files on the registry. and then restart the computer and install it again.

If it is not working I mean that Iolo system mechanic has a support team on their homepage : http://www.iolo.com/ look under support there !!

Hope thats helps :O)

Hi!

I understand that you had System Mechanic 7 installed on your computer, but it has since been uninstalled or deleted, correct? Did you have the standard version or the professional version?

Either way, the site to re-download your System Mechanic software is located here:

http://www.iolo.com/customercare/kbarticle.aspx?id=KBA-01366

This site allows you to download any of their programs free of charge. However, you will still need your licensing information to reactivate the software. If you don't know your licensing information and need to find out what it is, go to this website and enter your email:

http://www.iolo.com/customercare/licensinginfo.aspx

If you did not register your email with Iolo or if your computer came with System Mechanic preinstalled, you will need to provide Iolo with some proof of purchase in order to obtain licensing information for your software.

Hope I helped!
~Kiro