Secured Wireless is better than a unsecured one. Configuring a secured wireless network easy.
· First Check it the Wireless is turned on in the modem.
You must see the wireless light glow on.
Wireless LAN (WLAN) should be Enabled before configuring the wireless network
· To make sure, if the WLAN is enabled you can check the WLAN light glow.
· If it is off, then you can be sure that WLAN is disabled.
To Enable WLAN
· Before configuring wireless, connect your laptop through ethernet and connect it to http://192.168.1.1/">
· If you were asked for username and password, give the username and password of your modem.
by default BSNL modems have username : admin and password : admin
· After login, you will get the router configuration. Here, click on the Wireless Tab.
· Here you need to Select the check box Enable Wireless.
· After Wireless is Enabled you need to save the changes. Click SAVE/APPLY button. Your wirless configuration is saved now.
· Now Reboot your modem, Go to Management tab, and click Save/Reboot
· Wait till your modem restarts, Now your wirless network is ready for use.
Steps to configure wireless
· Before configuring wireless, connect your laptop through ethernet and connect it to
· If you were asked for username and password, give the username and password of your modem.
by default BSNL modems have username : admin and password : admin
· After login, you will get the router configuration. Here, click on the Wireless Tab.
· In Wireless section, give some name in the SSID (Serivce Set Identifiers), this SSID is also know as wireless network name.
· Then click on the Security tab below the Wireless Tab. The name given for SSID will appear here.
· Select WPA-PSK in Network Authentication and give the WPA Pre-Shared Key.
This Key is the Password for Secured wireless network,Which we need to give in the laptop to authenticate and connect to the secured network.
· Give 0 (Zero) for WPA Group Rekey Interval.
· After completing the above, Click SAVE/APPLY button. Your wirless configuration is saved now.
· Now Reboot your modem, Go to Management tab, and click Save/Reboot
· Wait till your modem restarts, Now your wirless network is ready for use.
Connecting to Wireless Network after configuring the WIFI.
· Connect your laptop to the wireless network and you will be asked for the password. This is the one which you gave for WPA Pre-Shared Key.
· Once you give the password correctly, you will be connected to the Secured Wireless network
×
Hai,i have bsnl modem (dna-a211-1)with wifi.i did buy nokia 5800 expreemusic last month.in that phone wifi availble.in the connectivity it indicates two access points automatically near the modem,it shows net connected,but in the browsing "NO GATEWAY REPLY"occurs.plz solve my problem
To connect wlan with nokia x6
I think the modem that you have is a type one.
which can only be connected using the ehternet cable .
please go to your nearest bsnl divisional and center and ask for type 2 wireless modem
you have to buy that.
for more info call 1500 customer service that should help you
all the best and thank you
PLS REPLY OR COMMENT. THANKS
4,267 views
Usually answered in minutes!
×