Where do I find an inexpensive (under $25) Universal Remote control that works with Kodak VCR/DVD player (model #DVC2010)? Is there a website that I can do a search for a compatible remote? I've alr

Panasonic DMR-ES30VS DVD Recorder/VCR Universal ...

www.fixya.com > ... > Panasonic DMR-ES30VS DVD Recorder/VCR

Panasonic DMR-ES30VS DVD Recorder/VCR, universal remote related issues. Getfree help ... My remote does not work anymore. what is the code for a universal remote? Thanks in ... Question about Philips DVD & Blu-Ray Players ... How do I getremote code for GE universal remote control Need remote code? How to ...

Philips Magnavox MWR20V6 DVD Recorder/VCR Remote ...

www.fixya.com > ... > Philips Magnavox MWR20V6 DVD Recorder/VCR

There is not really a true 'universal remote.' If the remote is of older design than the set you wish to control, it will not contain the code set you need.
Before you buy another, check the mfr's website for code sets for any given model remote to ensure you aren't buying another one which will end up in a drawer. Unfortunately, this is a very common problem.

Hi,
To get the code please go to below website

http://remotefinder.rca.com/default.aspx?site=rca

Please
Provide model of your remote
device to be programmed (VCR,TV)
Make name(toshiba,sony)

Thanx

hi! i have here a couple of codes for your sylvania DVD/VCR just try them, 1027, 2064, 3105, 1124, 2078, 3088, 1296, 2213, 3147, 1145, 3095. hope this helps!!!! goodluck!!!

For my direct tv remote, 20675 worked for me :) magnavox zv427mg9 combo vcr, dvd

www.remotes.com

Sorry to say that most universal remotes do not work well with combo devices ie. vcr/dvd, tv/vcr, and so on. One thing you can try doing is to program the vcr portion of the remote to controll the vcr side, and the dvd protion to control the dvd side. More than likeley there will be a lack of functionality since combination units have buttons that would not be needed on individual devices.

I have found that the Logitech Harmany universal remotes work very well with anything but they tend to cost quite a bit more. You might be able to find a basic model on ebay or amazon for around $50.

7-1-1 and 0-7-1-1 are the Magnavox universals.

Magnavox VCR. The Phillips universal remote lists the following codes:0330, 0430, 0534, 0324, 0224, 0124, 0247, 0230, 0125, 0093, 0598, 0830. Doesn't seem they have much control of which code gets used on which model. Start in the middle and work both ways to the ends. Make sure to post back which one you find that works.

http://tv.rca.com/RCATV/NewTV/Templates/GenericSupport.aspx?NRMODE=Published&NRORIGINALURL=%2fen-us%2ftechnicalsupport%2ehtml&NRNODEGUID=%7bCDBA69CE-8CEA-435A-8F62-C5E6DBE1ACF6%7d&NRCACHEHINT=NoModifyGuest#

I know you said that you've searched many websites for the codes, but if you look under the "remote control codes" section, there is a link that says "click here". It should take you to a "remote control code finder". I'm not sure what brand your dvd/vcr is but if it's available, it should be there.