Heidelberg tok error 5 - Garden

https://www.google.com/search?q=heidelberg+mo+offset+wiring+diagram

..

When you hit a bump could be stadilisator link loose ,tie rod ball joint table bushing at a stop sing let say you turn on the left side does it make a tok tok tok tok thats a cv joint

This is usually from a worn gear in the transport area. Xerox service call.

this a topic for vacuum cleaner troubleshooting. And you are talking about the Heidelberg letterpress model T 10x15 , what do you need?

The tok tok sound is probably a blown exhaust gasket. Replace the exhaust manifold gasket. As for the rough idle , replace the distributor cap, cap rotor, spark plugs and wires. With any luck this will take care of the misfire at idle and improve your gas mileage for a minimal cost for the repair.

Try this link; http://www.hamrick.com/vuescan/heidelberg_linoscan_1400.html

driver scanner driver 4100 umax astra

The carriage can not move freely. Open case. Check for something slip in roller, or may be some material that block carriage moving.

Hi - You need to install a driver for XP, you can find it on the following link:

Heidelberg 2650 Linoscan

Good Luck!

Try vuescan it say it works with your scanner http://www.hamrick.com/ it costs money but has a free trial