Pebble Layout for Gas fire

You might be able to sort the screen tearing of the black Pebble by opening the back (carefully as the back may have a bit of glue on it) and wedging a small pad of card or rubber or similar against the screen connector and the back. You should be able to find a YouTube video explaining what to do.

..
Pretty Pebbles 8x8 inch square Oombawka Design Crochet

Video instructions.
Tunisian Crochet Pebble Stitch

Use the pebble 4 driver. I am using windows 10 and have tested on 8 as well. Download the Pebble 4 windows 8 driver and it will work fine.

Depending on how often you use the pebble smart watch, the battery should last for 5-7 days before you need to recharge it.

If you order the pebble smart watch from their site, it says it will cost you $25 to ship overnite.

Hi
We wouldn't advise a Pebble fabric on a Mico as the models are a different design so the Pebble fabric wouldn't be an optimum fit on the Mico model.
For replacement Mico fabric contact [email protected]

Broken polystyrene in the Maxi Cosi Pebble doesn't sound very safe. Try reading the user manual for the Pebble:
http://www.maxi-cosi.com/~/media/Products%20Maxi%20Cosi/MCPebble/manuals/MAN_DRU1036_Maxicosi_Pebble_2013_LR_ENFRDENLESITPTJAPLUKHRSKHE.ashx
and definitely contact customer service:
(800) 951-4113
[email protected].

Unless you just have to have the "Pebbles" look, I would suggest changing it over to the "Coal" look, as this is an option. Rather than having individual coals, they are formed into one piece. Therefore, they will not slide or pop out like the pebbles do,

The popping out may be caused by delayed combustion. This happens when gas builds up under the pebbles and finally ignites in a big, whooshing type explosion. Which can cause the small pebbles to pop or slide out of the firebox.

Hope this helped solve your problem. Please let me know.

Just check for thickness adjustment pointer near card feeder . It should be 0.8 for standard cards.
Check in driver settings also if you have selected for manual feeding.
You may need to clean the Roller situated at feeder.