Confirmation pages I have a quick question. How do I stop printing the Confirmation Pages? I don't want them, I don't need them. Reason: I am on a service contract and after 4000 pages printed, they start charging me 1.3cents per page. that could add up, right? I am sure the confirmation is being counted as a printed page. Help!! How do I program the machine to stop printing confirmation pages of the faxes coming in and going out and the scans I am doing? Sandy

First, I'm not a Kyocera Representative.
* Check and call for support.

*** Following ins for information only.***
* Requires set up (for this function); https://www.youtube.com/watch?v=kKS1RvpNyfs
* Official set up; https://www.youtube.com/watch?v=DfqPE3SX7iE
* Print reports;https://www.youtube.com/watch?v=rTlBXc0UObM
* Contact your IT support or your local vendor for advice.
Aloha, ukeboy57

In the printer's dialogue find the print pages number. Print page from/to and select 20 pages chunks. In effect print only part of the document at a time. Add all chunks together in one pile. Work around I know, but it works.

go to control pannle, open hardware and sound ,then open device and printer,open your related printer and modify settings

Sending Confirmation
This report shows the fax number, the number of pages, elapsed time of
the operation, the communication mode, and the communication results.
You can set up your machine to print the message confirmation report in
one of the following ways (see page 5.3):
• Automatically after each transmission (ON)
• Automatically only if an error occurs during transmission (ERR)
• No report printed at all (OFF). You can print this report manually at
any time you want.
SENDING CONFIRM - A confirmation report shows whether the
transmission was successful or not, how many pages were sent, etc.
Select ON to print a confirmation report automatically each time you
send a fax.
Select OFF to turn this feature off.
Select ERROR to print only when an error occurs and the transmission
was not successful.

Press

Function 74
set
12
set
2 for always
set
stop

Press
Function
74
set
12
set
3
set
stop.

Touch ADMINISTRATION then touch CONFIGURATION PAGES then MENUMAP and that will print a guide for you to look for FAX REPORTS and when to print them. You can also have a thumbnail put on a report

I have had a similar issue with both laserjet 3005N and 1320N machines setup as network printers on a windows 2003 print server. Both machines install correctly and print test pages but once you push to much of a print job to it (in my case it was a 12mb pdf file) the printer stops printing and never prints again for some reason. After a quick reboot a test page will print but what gives?? Buffer issues? Not enough ram? None of this makes sense since the printer displays nothing and just stops printNo test pages or anything. I tried re-installing it and rebooting it. Nothing.

try to reinstall the printer driver..

good luck

just to check if the printer and the printer driver is working properly, try printing a 2 page document.

if it prints out correctly - check the applications documentation / user guide for printing instructions.