The clear piece that goes by the spout where the juice comes out fell off. I cannot place it back in correctly -cannot find the right position - and every time I make juice it pours through the tiny hole or is stopped up.
SOURCE: Juidelady jl500 juicer replacement parts
Hi there,
I also have a Juicelady, & need a part(s) HEre is a probable solution to your problem!
In the U.S.A. or Canada call 1-800-233-9054 to order the part. Or see if they have it in stock.They will ask for your address & phone number. Have your serial number ready-it should be on the bottom (or possibly the side) and you may need a magnifying glass to read it! It starts with the letters JL, and mine was JL500 (so look for that-but your may be a different model, I gave you mine so you have an idea of what to look for.)
Note: Anywhere else, or to check them out online:
The same warehouse is also at foxinternational.com if you'd rather see what they offer that way--but we got our call answered after waiting les than a minute. They even had the part we require but won't ship to Canada, so if your Canadian--call anyway, as it is a different part than we required,( the arms that brace the unit together.)
Hope this was helpful for you!
SOURCE: shuts itself off when juicing
FIRST DUMP THE FILTERS, THEY DECREASE YIELD AND MAY CAUSE MORE VIBRATION.
IF JUICER SHUTS DOWN PUSH RESET BUTTON ON BOTTOM. THIS TYPE OF JUICER DOES
NOT EJECT PULP AND REQUIRES SOME TIME TO MASTER. FEED THE STUFF SLOW AND
STEADY. WANT A GOOD JUICE? TRY 1 APPLE, 2 CARROTS, 2 CELERY AND A HALF LEMON.
IF YOU ARE REALLY BRAVE YOU CAN FINISH OFF BY SLOWLY POURING 6 OR 8 OUNCERS
OF WATER RIGHT DOWN THE CHUTE. THIS NOT ONLY DILUTES BUT LEECHES MORE JUICE
OUT OF THE PULP. JUICE SHOULD BE DILUTED AND DRANK SLOWLY.
SOURCE: I have an older model
Is this your product:?
http://www.alessi.co.uk/ashop-uk/design-products/kitchen-accessories-90143/citrus-squeezer-1018.html
Some Alessi replacement parts are available on-line here; have not seen anywhere else:
http://www.alessi.co.uk/ashop-uk/offers.php?mode=offer&offerid=313
You need to know the spare part # to be able to order and it may be easiest to simply contact Alessi by e-mail to make a parts inquiry:
http://www.alessi.co.uk/ashop-uk/help.php?section=contactus&mode=update
The alternative would be to visit the nearest Alessi dealer, see here:
http://www.alessi.com/en/stores/search-flagship
SOURCE: CARROTS ARE BACKING UP THE
Hi Catherine,
Can you supply the model number please?
Thanks,
Handie Andie
Unplug your Acme 6001 Juicer. Carry it to a countertop near your kitchen sink.
Run the pieces through the rinse cycle in your dishwasher or rinse under running tap water by hand. Air or wipe dry the pieces.
Wipe the base with a slightly soapy cloth. Rinse with a damp cloth and wipe dry. Reassemble your juicer by returning the pieces to the base in reverse order.
892 views
Usually answered in minutes!
You just need to force the rubber nipple through the hole (downward) on the metal spout. You may need to use pliers to assist. It will pop in.
where can i get rubber nipple for the juice spout?
×